KACE Systems Management Appliance 13.2 Common Documents

Configure queue-specific email settings

You can set up email settings for each ticket queue separately.

By default, the Service Desk is configured to use an internal SMTP server for sending ticket-related emails. You have an option to use an external SMTP server, however, you must configure it in the appliance network settings. For more information, see Change appliance network settings.

Log in to the appliance Administrator Console, https://appliance_hostname/admin. Or, if the Show organization menu in admin header option is enabled in the appliance General Settings, select an organization in the drop-down list in the top-right corner of the page next to the login information.

Go to the queue-specific Service Desk Queue Email Settings page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, in the Email Configuration section, click Configure Service Desk Queue Email Settings.

On the Service Desk Queue Email Settings page that appears, select a queue.

Or:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, click Queues.

To the right of the queue email address, click Configure Queue Email Settings.

The Service Desk Queue Email Settings page appears.

In the Built-in Email Setting section, specify the following options:

Field

Description

Email Address

A fully qualified email address for the server. Users typically do not reply to this address.

If you want to allow users to reply to appliance email, specify an email address in the Alternate Email Address field.

Alternate Email Address

Support@mydomain.com

The primary email address your users send email to. The appliance also uses this address to send email from the Service Desk. Confirm that the domain name is correct for your email service.

NOTE: As a valid email address, this address is subject to the same spam and security vulnerabilities as any other email address.

Accept email from unknown users

Allow unrecognized users to create tickets.

If this option is enabled in the queue configuration, any email sent to the Service Desk queue is allowed to set the Submitter field of a ticket. The sender is added to the appliance as a user with the User Console Only role. By default, this role has permission to create, view, and modify Service Desk tickets, and to interact with the appliance exclusively through the User Console. You can adjust the level of permissions associated with this and other roles, as applicable. For more information, see Setting up roles for user accounts.

If disabled, the preceding process works only when the email address of the sender is already associated with a Service Desk user account.

Select and configure the method of receiving inbound email using the options in the Inbound Email Settings section.

◦

Use SMTP Server for inbound emails: Select this option if you want to use an internal SMTP server for incoming email. You can specify the required credentials in the Outbound Email Setting section below. See 5.

◦

Use POP3 Server for inbound emails: Select this option if you want to use a POP3 server for incoming email. Specify the following options:

Option	Description
POP3 Server	Enter the name of the POP3 server you want to use for the queue. For example, pop.example.com.
Use SSL	Select this option if you want the POP3 server to use a secure connection.
POP3 Username (email address) POP3 Password	Enter the username and password of an account that has access to the POP3 server.

Click Test Connection to test your POP3 configuration. The Connection Test POP3 dialog box appears, showing several log messages, indicating the test result. If the test is successful, these messages, for example, indicate if the user account is authenticated, the number of unread messages, and the subject line of the most recent email. If the test fails, verify your configuration, and try again.

◦

Use IMAP Server for inbound emails: Select this option if you want to use an IMAP server for incoming email. Specify the following options:

Option	Description
IMAP Server	Enter the name of the IMAP server you want to use for the queue. For example, imap.example.com.
Use SSL	Select this option if you want the IMAP server to use a secure connection.
IMAP Server Username (email address) IMAP Server Password	Enter the username and password of an account that has access to the IMAP server.

Click Test Connection to test your IMAP configuration. The Connection Test IMAP dialog box appears, showing several log messages, indicating the test result. If the test is successful, these messages, for example, indicate if the user account is authenticated, the number of unread messages, and the subject line of the most recent email. If the test fails, verify your configuration, and try again.

◦

Use Gmail for inbound emails: Select this option if you want to use Google Gmail for incoming email. Click Select Credential.

▪

To use an existing Google OAuth credential, select in the list.

NOTE: You must create a dedicated Google OAuth credential for retrieving email. You cannot, for example use the same account for accessing Chrome devices and downloading email.

▪

To create a new Google OAuth credential, click Add Credential. The Add Credential dialog box appears. Specify the required options, as applicable. For more details, see Add and edit Google Workspace credentials.

◦

Use Office365 for inbound emails: Select this option if you want to use Office 365 for incoming email. Specify the following options:

Option

Description

Select Credential

•

To use an existing Office 365 OAuth credential, select in the list.

•

To create a new Office 365 OAuth credential, click Add Credential. The Add Credential dialog box appears. Specify the required options, as applicable. For more details, see Add and edit Microsoft Office 365 OAuth credentials.

Microsoft 365 API Service

Select the applicable Microsoft 365 API Service for your environment:

•

For an Azure AD app located in the US, select one of the following options, as applicable:

◦

Microsoft 365 GCC: You can continue to use the worldwide endpoints in Azure: https://graph.microsoft.com and https://portal.azure.com to register.

◦

Microsoft 365 GCC High: Use https://portal.azure.us and https://graph.microsoft.us to register.

◦

Microsoft 365 DoD: Use https://portal.azure.us and https://dod-graph.microsoft.us to register.

•

For an Azure AD app located in Germany, select Microsoft 365 Germany.

•

For an Azure AD app located in China, select Microsoft 365 China.

If you want to use an external SMTP server for emails associated with this queue, use the settings in the Outbound Email Setting section.

Select the Specify Queue specific SMTP Settings check box.

Specify the following options:

Option	Description
SMTP Server	Specify the hostname or IP address of an external SMTP server, such as smtp.gmail.com. External SMTP servers must allow anonymous (non-authenticated) outbound email transport. Ensure that your network policies allow the appliance to contact the SMTP server directly. In addition, the mail server must be configured to allow the relaying of email from the appliance without authentication.
SMTP Port	Enter the port number to use for the external SMTP server. For standard SMTP, use port 25. For secure SMTP, use port 587.
SMTP Username	Enter the username of an account that has access to the external SMTP server, such as your_account_name@gmail.com.
SMTP Password	Enter the password of the specified server account.

Specify how you want to handle file attachments when emailing ticket details in the Outgoing Email Attachment Setting section.

Option	Description
Allow embedded images	Select this option if you want to include any graphic files to ticket-related email. When this option is selected, the graphics appear as embedded images.
Combined image size limit per email (MB)	Specify the maximum file size of all images associated with a ticket that can be embedded in ticket-related email.
Allow file attachments	Select this option if you want to send files attached to the ticket instead of providing file links.
Combined file size limit per email (MB)	Specify the maximum file size of all file attachments that can be sent by email.

On the Service Desk Queue Email Settings page, in the Email on Events section, select the options for sending email when the specified events occur. Each column represents a type of Service Desk user (role) and each row represents a ticket event.

Service Desk user (role)	Description
Owner	The person who is expected to resolve the ticket.
Submitter	The person whose issue is being resolved.
Approver	The person who can approve or reject the ticket for processing.
Ticket CC	One or more email addresses that are stored in the CC field of the ticket.
Category CC	One or more email addresses that are stored in the CC List of the Category Value of the ticket. See Configure CC lists for ticket categories.
Queue Owners	One or more owners of the ticket queue, as specified by the Owner label. This only applies to the New Ticket Via Email and New Ticket via Portal events.

When a ticket event occurs, email is sent to the selected roles or users. For example, if you select the Any Change box in the Owner column, email is sent to the ticket owner whenever the ticket is changed. For the Comment and Ticket Closed triggers, email is sent immediately. For other ticket changes, however, email is sent every few minutes to prevent email overload.

NOTE: If users have the KACE GO mobile app installed on their smart phone or tablet, the system sends push notifications for the selected Service Desk ticket events.

Option	Description
Any Change	Any information on the ticket is changed.
Owner Change	The ticket's Owner field is changed.
Status Change	The ticket's Status field is changed.
Comment	Information, attachments, or screen shots are added to the ticket's Comments section. The system sends email notifications for comments when users add comments and click Submit on the ticket form. When users add comments and click Save on the ticket form, however, only the Any Change notification is sent.
Approval Change	The ticket's approval status has changed.
Resolution Change	The ticket's resolution has changed.
Escalation	The ticket has not been updated to a stalled or closed status within the escalation time defined by the ticket priority.
SLA Violation	The ticket has not been resolved by its due date.
Ticket Closed	The ticket's Status field is changed to Closed. This event is used to present a Satisfaction Survey to submitters. See Using the Satisfaction Survey.
New Ticket Via Email	A user sends an email message to the Service Desk and a ticket is created.
New Ticket Via Portal	A ticket is created through the User Console.

Click Save.

The appliance is configured to forward email to the designated SMTP server. If you have multiple queues, repeat the preceding steps for each queue.

Rename Service Desk titles and labels

You can rename the Service Desk titles and labels used in the Administrator Console and User Console as needed.

Go to the Service Desk Settings page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, click Settings.

Specify the following settings:

Setting	Description
Main Tab	The text that appears on the component-level tab in the Administrator Console and on the tab in the User Console. The default is Service Desk. However, if you upgraded from an earlier version of the appliance, you might see Help Desk as the default.
Queue Queues	The text that you want to display instead of Queue and Queues on the Service Desk Configuration page and on the Queue list in the Administrator Console. This text also appears as an option in the Choose Action menu and as a heading on the Ticket page in the User Console.
Ticket Tickets	The text that you want to display instead of Ticket and Tickets on the Ticket tab and Ticket page in the Administrator Console. This text also appears on the Ticket page in the User Console.
Process Processes	The text that you want to display instead of Process and Processes on the Service Desk Configuration page and on the Process list in the Administrator Console.

Click Save.

Enable or disable the conflict warning

When the conflict warning dialog is enabled for a queue, administrators and ticket owners see a notification dialog when multiple users are editing tickets concurrently. The dialog enables users to view changes made by others and decide which changes to keep.

You have administrator privileges in the Administrator Console.

Administrators can enable or disable the conflict warning dialog for each queue separately.

Go to the Service Desk Queue Detail page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, click Queues.

To display the Queue Detail page, do one of the following:

▪

Click the name of a queue.

▪

Select Choose Action > New.

In the User Preferences section, enable or disable the conflict warning:

Field

Description

Enable ticket conflict warning for ticket owners

Display a dialog, to administrators and ticket owners, that summarizes conflicts between the changes they are submitting and the changes submitted concurrently by other users. When administrators and ticket owners click Save or Apply Changes on the Ticket Detail page, the dialog appears if other users have edited and saved the ticket while it was open for editing. This enables administrators and ticket owners to choose whether to discard their changes, or overwrite the changes made by other users if there are conflicts.

The dialog is displayed only if other users have modified the ticket, and it is displayed to administrators and ticket owners only. The dialog is not displayed to other users.

NOTE: The dialog summarizes all changes made by other users. However, the current user's changes are summarized only if they conflict with changes made by other users.

Click Save.

View and edit response templates

Response templates allow you to store common responses as comments or resolutions in Service Desk tickets.

Each response template is associated to a specific ticket queue and belongs to the user that created it. You can select the applicable response template on the Ticket Detail page.

The template text supports the use of email tokens. Token values are dynamically updated using the field values from the ticket in which they are referenced. You can use the same tokens that are available in email templates. For more information, see Configure email templates.

A response template can be public or private. Private response templates can be updated and referenced in applicable tickets only by the user that created them. A public response template is available for selection in the associated ticket queue by other users, however only the user that created it can edit the contents of the response message. Other users can view the contents of public response templates, but cannot edit them.

Go to the Service Desk Response Templates page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, under Queues, click Response Templates.

To display the Response Template Detail page, do one of the following:

▪

Click the name of a response template.

▪

Select Choose Action > New.

NOTE: Those queue owners who do not have access to the Queues configuration pages can access the Response Templates page by clicking the Manage link that appears just above the Predefined Response option in the Ticket Detail page.

Specify the following settings:

Field	Description
Name	The name of the response template. This name appears available for selection in the Predefined Response field when you want to configure an automated response to applicable Service Desk tickets.
Make Public	Select this check box if you want to make this response template available for selection to other users. Other users can view the contents of public response templates, but cannot edit them.
Template	The contents of the response message. This field supports plain text and tokens.

If you made any changes to the response template, click Save.

To go back to the Response Templates list, click Cancel.

You can use a response template as a predefined response to a Service Desk ticket inquiry. For more information, see Add comments to tickets.

Please select your product:

To serve you better, please complete the Purpose of your Chat:

Recommended Solutions for Your Problem

KACE Systems Management Appliance 13.2 Common Documents - Administrator Guide

Configure queue-specific email settings

Configure queue-specific email settings

Rename Service Desk titles and labels

Rename Service Desk titles and labels

Enable or disable the conflict warning

Enable or disable the conflict warning

View and edit response templates

View and edit response templates