サポートと今すぐチャット
サポートとのチャット

Foglight for JMX 5.9.8 - User Guide

Foglight for JMX System Requirements Installing Foglight for JMX Managing JMX Agents Managing MBean Server Models Monitoring and Investigating JMX Data

Creating and Activating a JMX Discovery Agent

Before attempting this procedure, ensure that you have successfully completed Deploying the JMX Discovery Agent Package.

To create a JMX Discovery Agent:
1
On the Agent Status dashboard, click Create Agent.
2
In the HostSelector box, select the host to which you have deployed the JMXDiscoveryAgent. gar package, and then click Next.
3
In the Agent Type list, select JMXDiscoveryAgent, and then click Next.
4
To allow Foglight to automatically generate a name for the agent, select the Generic Name check box.
or
To specify a custom name for the agent,select the Specify Name check box, and then type the name in the Name box.
5
Click Next.
6
View your selections in Summary, and then click Finish.
7
Locate the new agent in the Agents table and select it.
8
Click Activate.

Next, create the JMX Agent using local process discovery through the setup wizard on the Application Servers Administration dashboard.

Creating a JMX Agent Using Local Process Discovery

Before attempting this procedure, ensure that you have successfully completed Deploying the JMX Discovery Agent Package and Creating and Activating a JMX Discovery Agent.

To create a JMX agent using discovery:
1
On the navigation panel, under Dashboards, click Application Servers > Administration.
2
On the Application Servers Administration dashboard, click Monitoring Agents > Setup agents...
3
Select JMX (Discovery).
4
On the Discovery Hosts page of the JMX - Setup Agents using Discovery wizard, select one or more monitored hosts on which you want to discover processes.
Click Next.
5
On the Identifying Properties page, define the set of identifying system properties that must be matched to enable process monitoring.
Do one of the following:
•
Click Add Property to manually add a property.
The Name and Value boxes are populated with the text “default”. Click the box to edit the text and define your own property name and value.
Select the Use Reg Ex check box if you want to use regular expressions. By default, this option is disabled.
Click Property Lookup to retrieve a list of available system properties.
a
Select the host from the Discovery Host list.
b
To refresh the list of available processes, click Rediscover.
c
Select the process from the Process ID list.
The list of System Properties refreshes based on your selection.
d
Select the check box for the system properties you want to use.
e
Click Add. The System Property Lookup dialog box closes. Click Next.
6
On the Matching Processes page, review the matched processes and their corresponding agent configurations.
a
Select the configurations for only the processes that you want to monitor.
 
* 
NOTE: An agent is created for each process you select in this step. The agent(s) are named according to the naming scheme defined at the bottom of the page.
b
Optional — To edit the agent naming scheme, click the edit icon at the bottom of the dialog box. The Edit Agent Naming Scheme dialog box opens, allowing you to change the naming scheme that is automatically assigned to agents whenever you use this configuration to create agents.
c
Click Next.
7
On the MBean Server Model page, select an MBean server model from the list. One or more agents may use the same model if their corresponding MBean servers contain the same MBean types (for example, in a clustered environment, or for multiple installations of the same application server type).
If no appropriate model exists or if you require a different MBean Server Model configuration, you can create a new server model. For more information, see Creating MBean Server Models.
Click Next.
8
On the Server Group page, assign the monitored MBean server to a group.
A group is typically used to represent the domain, cluster, or any other logical or administrative grouping, to which an MBean server belongs.
Select either Use the default or Assign the following Server Group. If you select Assign the following Server Group, you can either choose an existing group from the list, or define a new group.
Click Next.
9
On the Create Agents page, you have the option to save the configuration as a Discovery Template.
Optional — To save the configuration for later reuse, click Save setup as Discovery Template. In the box that opens, type a name for the configuration. This option saves all your settings, including the agent naming scheme.
By default, JMX agents are activated immediately after being created.
Click Finish.
10
A task appears in the Task History list. Use this entry to track the progress and to investigate any errors (if necessary).
Click the message in the Result column to open the Task Result dialog box and view the details of the task.
Next Steps:
•
After creating an agent, you can manage it from the Application Servers Administration dashboard. For more information, see Managing JMX Agents.
•
To create or manage server models, use the JMX view. For more information, see Managing MBean Server Models..
•
Use the JMX > Explorer dashboard to view the MBean data. For more information, see Monitoring and Investigating JMX Data..
•
View data collected by the agent in the Application Servers > Monitor dashboard. See the Monitoring Application Servers User and Reference Guide or help for more information.

Creating JMX Agents and Server Models from the Command-Line

As an alternative to creating and managing JMX agents and server models through the Foglight browser interface, you can use the fglcmd command-line scripts that are available on the Foglight Management Server. This allows you to automate the creation of a large number of agents or server models.

 
* 
NOTE: For more information about the command-line scripts included with Foglight, see the Foglight Command-Line Reference Guide.

You can also access help for the scripts from the command-line by typing: fglcmd /h.

The following JMX-specific commands are available:

 
Table 8. Available JMX-specific commands
Command
Description

createagent

Creates an agent called <NAME> on <HOST> (or <remoteClientId>) using server model ID <ID> with the given configuration settings. Either <HOST> or <remoteClientId> must be specified, but not both.

 

•
<remoteClientId> is the Remote Client ID of the Agent Manager on which the JMX agent must be created.
•
<ENV PROPS> is a comma-separated list of "name=value" pairs. <CLASSPATH> is a comma-separated list of paths.
•
<ACTIVATE> is a boolean indicating whether the agent is automatically activated after creation, and defaults to true.

 

Example:

jmx:createagent -name <NAME> -host <HOST> -serverModel <ID> ‑jmxServiceUrl <URL> [-username <USERNAME>] [‑password <PASSWORD>] [-connectionRetryInterval <CONNECTION RETRY INTERVAL>] [-serverGroup <SERVER GROUP>] [-jvmDataPort <JVM DATA PORT>] [-envProps <ENV PROPS>] [‑classpath <CLASSPATH>] [-activate <ACTIVATE>]

Or:

jmx:createagent -name <NAME> -remoteClientId <remoteClientId> -serverModel <ID> ‑jmxServiceUrl <URL> [-username <USERNAME>] [‑password <PASSWORD>] [-connectionRetryInterval <CONNECTION RETRY INTERVAL>] [-serverGroup <SERVER GROUP>] [-jvmDataPort <JVM DATA PORT>] [-envProps <ENV PROPS>] [‑classpath <CLASSPATH>] [-activate <ACTIVATE>]

deleteagent

Deletes the agent specified by <NAME>.

Example:

jmx:deleteagent -name <NAME>

updateagent

Updates the agent specified by <NAME> with the given configuration settings.

Example:

jmx:updateagent -name <NAME> -jmxServiceUrl <URL> [-username <USERNAME>] [-password <PASSWORD>] [-connectionRetryInterval <CONNECTION RETRY INTERVAL>] [‑serverGroup <SERVER GROUP>] [-jvmDataPort <JVM DATA PORT>] [-envProps <ENV PROPS>] [-classpath <CLASSPATH>]

createservermodel

Creates a new server model with id <ID>, optionally setting its name to <NAME>, description to <DESC> and copying the configuration from server model <ID2>.

Example:

jmx:createservermodel ‑id <ID> [‑name <NAME>] [‑desc <DESC>] [‑copy <ID2>]

deleteservermodel

Deletes the server model specified by <ID>.

Example:

jmx:deleteservermodel ‑id <ID>

listservermodels

Prints a list of all defined server models.

jmx:listservermodels

updateservermodel

Updates the name and/or description of a specified server model.

Example:

jmx:updateservermodel ‑id <ID> [‑name <NAME>] [‑desc <DESC>]

exportservermodel

Exports the configuration for a server model as an XML file.

Example:

jmx:exportservermodel -file <file path> -serverModel <name>

importservermodel

Imports the server model configuration that was previously exported as an XML file.

Example:

jmx:importservermodel -file <file path> [-newName <new name>] [- replace <boolean> ]

Usage Example
To create an agent using a pre-existing server model:
1
Open a command window on the Management Server.
2
Navigate to the <foglight_home>/bin directory. By default, the path is: C:\Quest_Software\Foglight\bin.
3
Type the following command to retrieve a list of all server models that are defined on the Management Server:
fglcmd -cmd jmx:listservermodels
Foglight returns the following information: the server model ID, its name (if specified), and its description (if specified). For example:
4
Type the following command to create an agent named OASAgent1, using the server model OracleAS_1:
fglcmd -cmd jmx:createagent ‑name OASAgent1 ‑host oas-host ‑serverModel OracleAS_1 ‑jmxServiceUrl service:jmx:rmi://oas-host:12401
The remaining parameters, listed in the table above, are optional.
5
Optional — To activate the agent when it is created, include the parameter:
-activate true
6
Foglight returns a status message when the operation is complete.

Managing JMX Agents

Managing JMX Agents

After you create a JMX agent, you can manage it from the Application Servers Administration dashboard. Click the agent name to open a list of options.

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択