サポートと今すぐチャット
サポートとのチャット

NetVault Plug-in for Oracle 11.3 - User Guide

Introducing Quest® NetVault® Backup Plug-in  for Oracle Defining a backup strategy Installing and removing the plug-in Configuring the plug-in Backing up data Using the Oracle® Flashback Database Restoring data
Restoring and recovering data: an overview Performing User Managed restores Using advanced User Managed restore procedures Performing RMAN restores Using RMAN types of recovery in a non-RAC environment Using advanced procedures with RMAN restores
Maintaining the Recovery Catalog Using the RMAN CLI Using the Plug-in with Oracle® RAC Using the Plug-in in a failover cluster environment Using the plug-in with Oracle® Data Guard Troubleshooting

Restoring SPFILE in a RAC environment

Because Control File Autobackups are a prerequisite in a multi-instance RAC environment, the SPFILE is backed up with the Control File whenever an Autobackup is performed. The SPFILE is restored from the Autobackup to the default location; for more information, see the following steps. If the instance is already started with the server parameter file, you cannot overwrite the existing server parameter file. For more information on restoring an SPFILE to a non-default location, see the Oracle® Database Backup and Recovery Basics guide.

1
From a terminal window, connect as the Oracle Software Owner to the node where Plug‑in for Oracle is installed.
2
Set the ORACLE_SID environment variable to the local instance.
export ORACLE_SID = <local_SID>
3
Start SQL*Plus, and connect with administrator privileges to the local instance.
SQLPLUS SYS AS SYSDBA
4
Shut down the local instance.
SHUTDOWN ABORT;
5
Start the local instance with the NOMOUNT option.
STARTUP FORCE NOMOUNT;
6
Disable the CLUSTER_DATABASE initialization parameter for the local instance.
ALTER SYSTEM SET CLUSTER_DATABASE=FALSE SCOPE=SPFILE SID='<local_SID>';
7
Shut down the local instance.
SHUTDOWN ABORT;
8
Exit SQL*Plus.
9
Shut down all RAC instances.
>srvctl STOP DATABASE -d <database_name> -o abort
10
Ensure that all RAC instances are shut down.
>srvctl STATUS DATABASE -d <database_name>
11
Start RMAN, and connect to the target database and Recovery Catalog.
>rman TARGET / CATALOG rman/<password>@<connect_identifier for catalog>
12
Start the local instance with the FORCE NOMOUNT option.
STARTUP FORCE NOMOUNT;
13
Set the database identifier for the target database with SET DBID.
RMAN displays the DBID whenever you connect to the target. You can also obtain it by inspecting saved RMAN log files, querying the Catalog, or looking at the filenames of Control File Autobackup. The DBID is also available on the Details dialog box or the Backup Contents tab.
SET DBID <DBID>;
14
Restore the SPFILE Autobackup.
If you are restoring the SPFILE to the default location, run:
RUN {
ALLOCATE CHANNEL CH1 TYPE 'SBT_TAPE';
RESTORE SPFILE FROM AUTOBACKUP;
}
15
Start the instance with the FORCE option.
STARTUP FORCE;
16
Exit RMAN.
17
Start SQL*Plus, and connect with administrator privileges to the local instance.
SQLPLUS SYS AS SYSDBA
18
Enable the CLUSTER_DATABASE initialization parameter for the local instance.
ALTER SYSTEM SET CLUSTER_DATABASE=TRUE SCOPE=SPFILE SID='<local_SID>';
19
Shut down the local instance.
SHUTDOWN ABORT;
20
Exit SQL*Plus.
21
Start all RAC instances.
>srvctl START DATABASE -d <database_name>
22
Start all RAC Services.
>srvctl START SERVICE -d <database_name>
23
Ensure that all RAC instances are running.
>srvctl STATUS DATABASE -d <database_name>

Restoring Control Files in a RAC environment

Restoring the Control File should only be performed in the following cases:

•
All current copies of the Control File have been lost due to a media failure or accidental user deletion, or have become corrupted and are not usable.
•
Oracle® Customer Support has advised that a Control File restore is required.

Because Control File Autobackups are a prerequisite in a multi-instance RAC environment, perform the following steps to restore the Control Files from the Autobackup.

1
From a terminal window, connect as the Oracle Software Owner to the node where Plug‑in for Oracle is installed.
2
Set the ORACLE_SID environment variable to the local instance.
export ORACLE_SID = <local_SID>
3
Start SQL*Plus, and connect with administrator privileges to the local instance.
SQLPLUS SYS AS SYSDBA
4
Shut down the local instance.
SHUTDOWN ABORT;
5
Start the local instance with the NOMOUNT option.
STARTUP FORCE NOMOUNT;
6
Disable the CLUSTER_DATABASE initialization parameter for the local instance.
ALTER SYSTEM SET CLUSTER_DATABASE=FALSE SCOPE=SPFILE SID='<local_SID>';
7
Shut down the local instance.
SHUTDOWN ABORT;
8
Exit SQL*Plus.
9
Shut down all RAC instances.
>srvctl STOP DATABASE -d <database_name> -o abort
10
Ensure that all RAC instances are shut down.
>srvctl STATUS DATABASE -d <database_name>
11
Start RMAN, and connect to the target database.
>rman TARGET /
12
Start the local instance with the FORCE NOMOUNT option.
STARTUP FORCE NOMOUNT;
13
Set the database identifier for the target database with SET DBID.
RMAN displays the DBID whenever you connect to the target. You can also obtain it by inspecting saved RMAN log files, querying the Catalog, or looking at the filenames of Control File Autobackup. The DBID is also available on the Details dialog box or the Backup Contents tab.
SET DBID <DBID>;
14
Restore the Control File Autobackup.
If you are restoring the Control File from the last Autobackup, run:
RUN {
ALLOCATE CHANNEL CH1 TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM AUTOBACKUP;
ALTER DATABASE MOUNT;
RESTORE DATABASE;
RECOVER DATABASE;
}
15
Open the database with the RESETLOGS option.
ALTER DATABASE OPEN RESETLOGS;
16
Exit RMAN.
17
Start SQL*Plus, and connect with administrator privileges to the local instance.
SQLPLUS SYS AS SYSDBA
18
Enable the CLUSTER_DATABASE initialization parameter for the local instance.
ALTER SYSTEM SET CLUSTER_DATABASE=TRUE SCOPE=SPFILE SID='<local_SID>';
19
Shut down the local instance.
SHUTDOWN ABORT;
20
Exit SQL*Plus.
21
Start all RAC instances.
>srvctl START DATABASE -d <database_name>
22
Start all RAC Services.
>srvctl START SERVICE -d <database_name>
23
Ensure that all RAC instances are running.
>srvctl STATUS DATABASE -d <database_name>
 
* 
IMPORTANT: After restoring a Control File from an Autobackup, Quest recommends that you perform a Full or Incremental Level 0 backup with the entire database selected on the NetVault Backup Selections page.

Performing disaster recovery in a RAC environment

Disaster recovery includes the restore and recovery of a multi-instance RAC database after a complete media failure of all the shared storage including the current Control Files, all online redo log files, all parameter files, and the Recovery Catalog. To perform a disaster recovery, you need the minimum required set of backups; the minimum includes the backups of all the datafiles, some archived redo logs generated after the time of the backup, and at least one Autobackup of the Control File.

If your goal is to create a copy of your target database for ongoing use on a standby RAC environment or independent RAC environment, do not use these procedures. Instead, use the Duplicate Database backup type, which is designed for this purpose. For more information, see Duplicating a database in a RAC environment.

 
* 
IMPORTANT: When performing a test recovery, ensure that you do not connect to the Recovery Catalog during datafile restoration. Otherwise, RMAN records information about the restored datafiles to the Recovery Catalog. This recording interferes with future attempts to restore and recover the primary database. If you must use a Recovery Catalog because the Control File is not large enough to contain the RMAN repository data on all the backups that you need to restore, export the catalog and import it into a different schema or database, and use the copied Recovery Catalog for the test restore. Otherwise, the catalog considers the restored database as the current target database.

The following procedure details the steps to perform disaster recovery to the same RAC environment where the source database resided. This procedure would be used in the scenario in which a complete media failure of the shared storage occurred and the damaged shared storage was rebuilt using the same configuration or new shared storage was configured imitating the original shared storage’s configuration.

For variations on the following disaster recovery procedure, see Performing Disaster Recovery in the Oracle® Database Backup and Recovery Advanced User’s Guide.

•
Prerequisites
•
Performing the disaster recovery

Prerequisites

To perform a disaster recovery without a Recovery Catalog, the following requirements must be met:

•
Oracle® RAC environment in place: You must have a properly configured Oracle RAC environment that matches the configuration as specified Performing User Managed backups. In addition, the same version of the Oracle database software must be installed in the RAC environment as it existed on the damaged RAC environment. The ORACLE_HOME should be identical on both the original and new node. You do not have to create the database, but you do need to configure Oracle Net Services and ASM for shared storage.
•
NetVault Backup software and the Plug‑in for Oracle installed: The same version of NetVault Backup software and the plug-in must be installed on one of the nodes in the RAC using the same NetVault Machine Name as previously defined for the RAC environment. Ensure that the plug-in default attributes are defined as specified in Configuring default attributes.
•
DBID of the source database identified: Identify the DBID of the damaged database. If the DBID was not recorded as part of the initial plug-in installation, you can obtain the DBID by examining the NetVault Backup binary logs for RMAN-based backups of the source database. The DBID is also available on the Details dialog box or the Backup Contents tab.
•
Default Location for SPFILE must exist: The default location in the ASM shared storage must exist before performing the following steps. Failure to ensure that the default location exists results in an ORA-17502 Failed to create file error during the SPFILE restore. Additionally, the SPFILE location should be detailed in the PFILE with the SPFILE parameter.
•
Backups of all tablespaces made available: Verify that you have the latest backups of all the tablespaces.
関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択