サポートと今すぐチャット
サポートとのチャット

Change Auditor 7.3 - User Guide

Change Auditor Overview Agent Deployment Change Auditor Client Overview Overview Page Searches Search Results and Event Details Custom Searches and Search Properties Enable Alert Notifications Administration Tasks Agent Configurations Coordinator Configuration Purging and Archiving your Change Auditor Database Disable Private Alerts and Reports Generate and Schedule Reports SQL Reporting Services Configuration Change Auditor User Interface Authorization Client Authentication Certificate authentication for client coordinator communication Integrating with On Demand Audit Enable/Disable Event Auditing Account Exclusion Registry Auditing Service Auditing Agent Statistics and Logs Coordinator Statistics and Logs Change Auditor Commands Change Auditor Email Tags

View and save coordinator trace logs

To view Change Auditor logs (Statistics page):
1
Open the Statistics page.
2
Click Logs | Open Log.
3
On the Open Log File dialog, use the controls at the top of the dialog to locate the Change Auditor log to be viewed. Select the log file and click Open.
This opens a page in the client which displays the log entries for the selected log.
Whenever an entry is highlighted in the top pane, the corresponding details will be displayed in the Event Details pane across the bottom of the screen.
4
Use the tool bar buttons to search the log for a specific entry, to copy and paste the contents of this log for use in another application, and print or save the contents of this log.
To save Change Auditor logs to a specific location (Coordinator Statistics page):
1
Open the Coordinator Statistics page.
2
Select a coordinator from the list and click Logs | Get All Logs.
3
On the Browse for Folder dialog, select the location where these logs are to be saved. Click OK to save your selection.
* 
NOTE: If necessary, click Make New Folder to create a new folder for these logs.
To view the coordinator log (Coordinator Statistics page):
1
Open the Coordinator Statistics page.
2
Select a coordinator from the list and click Logs | View Coordinator Log.
This opens a page in the client which displays the log entries in the Change Auditor coordinator log (ChangeAuditor.ServiceLog.nptlog).
Whenever an entry is highlighted in the top pane, the corresponding details will be displayed in the Event Details pane across the bottom of the screen.
In addition, when an error is highlighted in the top pane and there is a call stack available for that error, an Exception pane will also be displayed.
3
Use the tool bar buttons to search the log for a specific entry, to copy and paste the contents of this log for use in another application, and to print or save the contents of this log.
To view the coordinator log (coordinator system tray icon):
1
From the server where the coordinator is installed, right-click the coordinator system tray icon and select View Coordinator Log.
2
This opens the log viewer, allowing you to review the entries recorded in the coordinator log (ChangeAuditor.ServiceLog.nptlog).

 

Change Auditor Commands

This appendix lists the commands available throughout the Change Auditor client. The tables in this appendix list the following commands that are available throughout the entire client:

•
Menu commands
•
Tool bar buttons
•
Right-click commands

Menu commands

The Change Auditor commands are grouped under a menu on the menu bar. Some of these commands perform an action immediately; others display an additional dialog or open a wizard where you select options or specify additional information.

The following table provides a description of the commands available under each of the Change Auditor menus.

 
Table 1. Menu commands
Menu command
Shortcut key
Description
File Menu
Connect

Ctrl+O

Use to display the Connection screen to select the connection profile to be used to connect to a Change Auditor coordinator.

This command is only available when the client is disconnected from a coordinator.

Disconnect

Ctrl+D

Use to disconnect from the current coordinator.

Open Log

 

Use to view one of the log files. Selecting this command will display the Open Log dialog allowing you to select the log file to be viewed. Once selected, a new tabbed page will be created in the client displaying the entries logged in the selected log.

Open Client Log

 

Use to view the current client log. A new tabbed page will be created in the client displaying the entries logged to the current client log.

Print

Ctrl+P

Use to send the contents of the displayed page to the designated printer. When you select this command, the Print dialog will be displayed allowing you to specify various print options.

Print to File

Ctrl+Shift+F

Use to save the contents of the displayed page to either an Excel (.xls) or comma delimited (.csv) file. When you select this command, the Save As dialog will be displayed allowing you to specify the location, file name and type of file to be created.

Print to PDF

Ctrl+Shift+D

Use to save the contents of the displayed page to a PDF file. When you select this command, the Save As dialog will be displayed allowing you to specify the location and file name.

Print Preview

Ctrl+Shift+P

Use to preview the contents of the displayed page prior to printing it.

Page Setup

Ctrl+Shift+U

Use to define the page settings for printing. Selecting this command will display the Page Setup dialog allowing you to define the paper, page orientation and margins.

Exit

Ctrl+Q

Use to close the client.

Edit Menu
Cut

Ctrl+X

Use to move the selected item (folder or search definition) to a different location in the explorer view (left pane) on the Searches page. Once cut, this item can then be pasted (or moved) to another location.

Copy

Ctrl+C

Use to copy the selected item (folder or search definition) to another location in the explorer view (left pane) on the Searches page. Once copied, a copy of this item can be pasted to another location.

Paste

Ctrl+V

Use to paste the contents of the clipboard (folder or search definition) to the selected location.

Delete

 

Use to remove the selected user-defined item (folder or search definition).

Move

 

Use to move the selected item (folder or search definition) to another location in the explorer view (left pane) on the Searches page. Selecting this command will display the Select the Destination Folder dialog allowing you to select the new location.

Action Menu
Refresh

F5

Use to retrieve and redisplay current data.

Autofit Columns to Contents

Ctrl+F

Use to resize the columns based on the content, which will eliminate the scroll bars.

Reset Display

 

Use to close multiple client windows and return to a single client window.

Show XML Tab

 

Use to display the XML tab, which displays the XML representation of a selected search criteria, at the end of the Search Properties tabs.

NOTE: This command is only available from the Searches page and a Search Results page.
Show SQL Tab

 

Use to display the SQL tab, which displays the SQL query built to run a selected search, at the end of the Search Properties tabs.

NOTE: This command is only available from the Searches page and a Search Results page.
Auto Connect

 

Use to enable or disable the auto connect feature. When enabled, the Connection Profile dialog will not be displayed when the client is launched. Instead, the previously specified connection profile will automatically be used to connect to the coordinator.

Disconnect client after 30 minutes of inactivity

 

Use this to disconnect from the client after 30 minutes of inactivity. If this option is not checked, the connection to the coordinator remains open.

Agent Notifications

 

Use to hide (or display) the desktop notification that is displayed in the lower right-hand corner of the screen whenever an agent is connected or disconnected from the coordinator, or when the coordinator is stopped or started.

NOTE: Agent Notifications is enabled by default.
Agent Auto Refresh

 

Use to enable or disable the refreshing of the currently displayed grid (on the Deployment, Overview or Agent Statistics page) when an agent either connects or disconnects.

NOTE: Agent Auto Refresh is enabled by default.
Hide Unlicensed Components

 

Use to hide unlicensed components from the Administration Tasks tab and unlicensed events throughout the client.

NOTE: This command is only available from the Administration Tasks tab.
NOTE: This feature only applies to users who have never had a specific product license (e.g., Change Auditor for Exchange). Users who had a trial license that has expired, will not be able to hide components. This is so that you can continue to search for events that may have occurred during your trial period.
Export

 

Use to export the Administration settings, such as configurations and settings, and auditing and protection templates, into an XML file. Selecting this command displays an Export dialog allowing you to select the settings/templates to be exported.

NOTE: This command is only available from the Administration Tasks tab.
Import

 

Use to import previously exported Administration settings. Selecting this command displays an Import dialog allowing you to select the settings/templates to be imported.

NOTE: This command is only available from the Administration Tasks tab.
View Menu
Deployment

Ctrl+F8

Use to display the Deployment page, from which you can deploy agents.

Overview

Ctrl+F9

Use to display the Overview page, which displays the results of your favorite search as well as an overview of the following information:

•
Top agent activity
•
Recent event activity
•
Count of events by event class, facility, location, severity, result or subsystem
•
Agent status for the entire enterprise or individual domain
•
Coordinator status for the entire enterprise or a single domain
•
Alert history counts
Searches

Ctrl+F10

Use to display the Searches page, from which you can run searches, define new searches and enable alerting.

Statistics | Agent

Ctrl+F11

Use to display the Agent Statistics page which provides a global view of all your agents, providing you with their current status and statistics.

Statistics | Coordinator

Shift+F11

Use to display the Coordinator Statistics page which provides coordinator status, database information and agent connection, event and alert data.

Administration

Ctrl+F12

Use to display the Administration Tasks tab which provides a single location where you can perform various administrative tasks related to configuring Change Auditor, customizing the auditing process and defining protection.

Close All Windows

 

Use to close all open windows.

List of open windows

 

The remainder of this menu lists all of the windows that are currently opened in the client. A check mark to the left of a window indicates the window that is currently active.

Help Menu
About

 

Use to display the Quest Change Auditor dialog which displays the following information:

•
The About tab displays the current version, patent, trademark and copyright statements.
•
The License tab provides license compliance information.
•
The Legal Notices tab displays acknowledgments for third party components that are used in Change Auditor
•
The Contact tab provides contact information for technical support, product questions and sales.
Contents

F1

Use to display the contents and initial screen of the online help.

Tool bar buttons

The following table lists all of the commands available on the various tool bars in the client. It lists the commands/buttons in alphabetical order and provides a brief description of each command.

* 
NOTE: When a tool bar button contains an arrow to the far right, this indicates that you can expand the button to select an additional command.
 
Table 2. Tool bar buttons
Tool bar button
Description
Change Auditor pages

Add

Depending on the page, use to add an entry to a search criteria list, add an object to an auditing list, define a new template, create a scheduled purge job, etc.

Most Administration Tasks pages

Add

Add Role Definition
Add Task Definition
Add Application Group

Use the Add options as defined below:

•
Add Role Definition - use to define a new role defining who is authorized to perform the selected tasks and/or operations.
•
Add Task Definition - use to define a new task defining the operations that can be performed.
•
Add Application Group - use to define a new Authorization Manager Application Group.

Application User Interface page

Add

Subsystem
Event Class
Object Class
Severity
Results

Use to add an entity (subsystem, event class, object class, severity or results) to the What search criteria list or purge criteria.

What tab

Add with Events

Subsystem
Event Class
Object Class
Severity
Results

Use to add an entity that already has an event associated with it in the coordinator database to the What search criteria list or purge criteria.

What tab

Add with Events

Use to add an entity that already has an event associated with it in the coordinator database to the search or purge criteria.

Who tab

Where tab

Origin tab

Add | Add Wildcard Expression

Use to specify a wildcard expression for the search criteria or purge criteria.

Who tab

Where tab

Add | Add Server Types

Use to specify a server type for the search criteria or purge criteria.

Where tab

Add | Exclude

Use to exclude a mailbox from Exchange auditing.

Exchange Mailbox Auditing page

Add | Select Multiple Objects

Use to define custom Active Directory and ADAM auditing - defining the objects, classes and/or attributes to be audited by Change Auditor.

Active Directory Auditing page

ADAM (AD LDS) Auditing page

Advanced Options | Advanced Options

Use to display the Advanced Deployment Options dialog where you can view or modify the following settings:

•
Specify Agent Installation Location
•
Specify a Custom Share on the Remove Server
•
Launch ServiceStatusTray of startup
•
Restart Agent on failure
•
Specify a Group Policy Backup

Deployment page

Advanced Options | ActiveRoles Integration

Deploy Scripts Only
Deploy Scripts and Excluded Accounts

Use the Active Roles integration options as described below:

•
Deploy Scripts Only - use to copy and run the Active Roles integration scripts on the Active Roles server. These scripts instruct Active Roles to capture the initiator information for all users and pass this information onto Change Auditor.
•
Deploy Scripts and Excluded Accounts - use to specify user and computer accounts that are to be excluded from this integration. Change Auditor then deploys the Active Roles integration scripts that signal Active Roles to retrieve the initiator information for all users except for those specified for exclusion.

Refer to the Quest Change Auditor Installation Guide for more information on Active Roles integration.

Deployment page

Alert Properties

Use to display the Alert properties across the bottom of the Alert History page.

Alert History page

Apply Changes

Use to save your coordinator configuration settings.

Coordinator Configuration page

Assign

Use to assign an agent configuration to the selected agents or to assign a template to an agent configuration.

Agent Configuration page

Excluded Accounts Auditing page

SQL Auditing page

File System Auditing page

Registry Auditing page

Services Auditing page

File System Protection page

Comments

Use to enter a comment for the selected event.

Event Details pane

Configurations

Use to display the Configuration Setup dialog to add, edit or delete agent configuration definitions.

Agent Configuration page

Connect To

Use this button to select the domain controller to be used to apply ACLs or to revert back to the client’s default global catalog.

NOTE: This button is available only when you have selected to save your Active Directory and Group Policy protection templates to Active Directory using the Protection tab of the Coordinator Configuration tool.

Active Directory Protection page

Group Policy Protection page

Copy

Use to copy the displayed event details to the clipboard.

Log pages

Event Details pane

SQL tab

XML tab

Credentials

Set
Clear
Test

Use to set, clear or test the credentials to be used for installing agents on the selected domain.

Deployment page

Default

Use to reset the severity and enabled settings of the selected events back to the factory defaults.

Audit Events page

Default All

Use to reset all agent configurations back to the default configuration.

Agent Configuration page

Delete

Use to remove the selected entry from the list.

Application User Interface page

Member of Group Auditing page

AD Query Auditing page

Exchange Mailbox Auditing page

Purge Jobs page

Report Layouts page

Who tab

Where tab

Origin tab

Delete | Delete Administration Account

Use to remove the selected administration account from an Active Directory, ADAM (AD LDS), or Group Policy protection template.

Active Directory Protection page

ADAM (AD LDS) Protection page

Group Policy Protection page

Delete | Delete Agent

Use to remove the selected agent from an EMC or NetApp auditing template.

EMC Auditing page

NetApp Auditing page

Delete | Delete Excluded Account

Use to remove the selected account from an Excluded Accounts auditing template.

Excluded Accounts Auditing page

Delete | Delete File Path

Use to remove the selected file path from a File System auditing or protection template, an EMC auditing template or a NetApp auditing template.

File System Auditing page

EMC Auditing page

NetApp Auditing page

Delete | Delete Object

Use to remove the selected object from custom Active Directory or ADAM auditing; an Active Directory, ADAM (AD LDS) or Group Policy protection template.

Active Directory Auditing & Protection pages

ADAM (AD LDS) Auditing & Protection pages

Group Policy Protection page

Delete | Delete Object Class

Use to remove the selected object class from the Active Directory or ADAM (AD LDS) auditing list.

Active Directory Auditing page

ADAM (AD LDS) Auditing page

Delete | Delete Override Account

Use to remove the selected override account from a protection template.

Protection pages

Delete | Delete Path

Use to remove the selected path from the auditing template.

SharePoint Auditing page

Delete | Delete Registry Key

Use to remove the selected registry key from a Registry auditing template.

Registry Auditing page

Delete | Delete Service

Use to remove the selected service from a Service auditing template.

Service Auditing page

Delete | Delete SQL Instance

Use to remove the selected SQL instance from a SQL auditing template.

SQL Auditing page

Delete | Delete Template

Use to remove the selected auditing or protection template.

Auditing pages

Protection pages

Delete Criteria

Use to remove the selected entry from the What search criteria list.

What tab

Design Report

Use to launch the report designer to create a custom report layout for a selected search query.

Report tab

Disable

Use to disable the selected events.

Event Details pane

Audit Events page

Disable Alert

Used to disable a private alert.

Private Alerts and Reports page

Disable Report

Used to disable a private report.

Private Alerts and Reports page

Edit

Use to modify the selected item.

Most Administration Tasks pages, including:

•
Purge Jobs page
•
Report Layouts page
•
Application User Interface page
•
Auditing pages
•
Protection pages

Edit Event Class

Use to modify the selected entry in the What search criteria list.

What tab

Edit Logon

Use to modify the type of logons included in a logon search.

What tab

Email

Use to launch the configured email client to email the selected event details.

Event Details pane

Enable

Use to enable the selected events.

Audit Events page

Event Details pane

Event Details

Use to display the Event Details pane across the bottom of the Overview pane, Search Results page, or Alert History page.

Overview page

Search Results page

Alert History page

Event Logging

Use to enable or disable event logging.

Agent Configuration page

Explorer View

Use to show the explorer view in the left-hand pane of the Searches page.

Searches page

Find

Use to search for text in the currently displayed trace log. Enter a word or string of characters to be located.

Log pages

Force Refresh

Use to force a topology harvest refresh to discover new servers added to the Active Directory forest and display them on the Deployment page.

NOTE: Topology scan takes a long time when the environment contains a large number of workstations.

Deployment page

Grid View

Use to hide the explorer view and display only the Searches list on the Searches page.

Searches page

Hide Properties

Use to hide the Search Properties tabs across the bottom of the Searches page.

Use to hide the Resource Properties pane across the bottom of the Agent Statistics page.

Searches page

Agent Statistics page

Hide Uninstalled Agents

Use to remove uninstalled agents from the current Agent Statistics view.

Agent Statistics page

Hide Uninstalled Coordinators

Use to remove uninstalled coordinators from the current Coordinator Statistics view.

Coordinator Statistics page

High/Medium/Low

Use to change the severity level assigned to the selected events.

Audit Events page

Install or Upgrade

Use to install or upgrade an agent on the selected servers.

Deployment page

Knowledge Base

Use to display the associated Event Reference Guide.

Audit Events page

Event Details pane

Logs

Open Log
Get All Logs
View Agent Log
View Coordinator Log

Use the Log options as described below:

•
Open Log - use to retrieve a Change Auditor trace log file and display it in the client.
•
Get All Logs - use to retrieve any associated logs and save them to a specified location on the local machine.
•
View Agent Log - use to display the current Change Auditor agent trace log in the Change Auditor client.
•
View Coordinator Log - use to display the current coordinator trace log in the client.

Agent Configuration page

Agent Statistics page

Coordinator Statistics page

Deployment page

Match Case

Use to locate log entries that match the case that was entered in the search text.

Log pages

New

New Folder
New Search

Use the New options as described below:

•
New Folder - use to create a new folder in the explorer view of the Searches page.
•
New Search - use to create a new search definition.

Searches page

New Servers

Use to enable or disable the automatic deployment of agents to new servers found in your Active Directory forest.

Deployment page

Next

Use to move to the next log entry that contains the search text.

Log pages

Overviews

Use to display the Overview panes across the bottom of the Overview page.

Overview page

Preview Changes

Use to run the search based on the changes made to the search query and display the results in the current Search Results page.

Search Properties tabs (Search Results page)

Preview Report

Use to display a query results report.

Report tab

Previous

Use to move to the previous log entry that contains the search text.

Log pages

Print

Print
Print to File
Print to PDF
Print Preview
Page Setup

Use the print options to print or save the contents of the displayed page.

•
Print - use to send the contents of the active page to a designated printer.
•
Print to File - use to save the contents of the active page to either an Excel (.xls) or comma delimited (.csv) file.
•
Print to PDF - use to save the contents of the active page to a PDF file.
•
Print Preview - use to display the print layout of the active page prior to printing it.
•
Page Setup - use to define the page settings for printing.

All pages

Protect Object

Use to protect Active Directory objects, ADAM (AD LDS) objects, Group Policy Objects, Exchange mailboxes, File System files and folders against unauthorized modifications.

Event Details pane

Refresh

Use to retrieve and display the latest data available.

Overview page

Log pages

Refresh Configuration

Use to retrieve the current agent configuration assignments.

Agent Configuration page

Refresh Status

Use to refresh the deployment status of the selected servers.

Deployment page

Related Search

Use to view additional details about the user who initiated the change, view resource details about the machine where the change occurred, or run related searches based on the who, where, what, when or origin of an event.

Event Details pane

Restart Agent

Use to stop and then restart an agent. This button is only available when an agent is in an ‘active’ state.

Agent Statistics page

Restore Value

Use to restore the current value (To value) to its previous value (From value).

NOTE: Applies to 6.x (and higher) events reporting Active Directory attribute changes only.
NOTE: The Restore Value feature may not work for all events. Specifically, values cannot be restored for the following events:
•
User password changed
•
User password changed by non-owner
•
User account locked
•
User account unlocked
•
User must change password at next logon option changed

Event Details pane

Run

Use to run the selected search and display the events returned in a new Search Results page.

Searches page

Search Properties tabs

Save

Use to save a newly created search or modifications made to a search definition.

Search Properties tabs

Save As

Save As
Save As Default

Use the Save As options as described below:

•
Save As - use to save the search definition using a different name and/or location.
•
Save As Default - use to save the search definition as the new default for creating new searches.

Search Properties tabs

Search Properties

Use to display the Search Properties tabs across the bottom of the page.

Search Results page

Select All

Use to select all the entries in the currently displayed trace log, which can then be copied for use in another application.

Log pages

Set Agent Uninstalled

Use to flag the selected agent as ‘uninstalled’.

NOTE: This button is only available when the selected agent is in an ‘active’ state.

Agent Statistics page

Set Coordinator Uninstalled

Use to flag the selected coordinator as ‘uninstalled’.

NOTE: This button is only available when the selected coordinator is in an ‘active’ state.

Coordinator Statistics page

Shared Mailboxes

Use to view automatically detected shared mailboxes or to define a shared mailbox on the Exchange Mailbox auditing page.

Exchange Mailbox Auditing page

Show Matched Entries Only ()

Use to display only the log entries that match the word/string of characters entered in the search text.

Log pages

Show Properties

Use to display the Search Properties tabs across the bottom of the Searches page.

Use to display the Resource Properties pane across the bottom of the Agent Statistics page.

Searches page

Agent Statistics page

Show Uninstalled Agents

Use to include uninstalled agents in the current Agent Statistics view.

Agent Statistics page

Show Uninstalled Coordinators

Use to include uninstalled coordinators in the current Coordinator Statistics view.

Coordinator Statistics page

Start Agent

Use to start a stopped agent. This button is only available when an agent is in an ‘inactive’ state.

Agent Statistics page

Stop Agent

Use to stop an agent. This button is only available when an agent is in an ‘active’ state.

Agent Statistics page

Test SMTP

Use to generate a test email based on the configuration information entered in the SMTP Configuration pane.

Coordinator Configuration page

Test SNMP

Use to generate a test SNMP trap based on the configuration information entered in the SMTP Configuration pane.

Coordinator Configuration page

Uninstall

Use to uninstall the agent from the selected servers.

Deployment page

関連ドキュメント

The document was helpful.

評価を選択

I easily found the information I needed.

評価を選択