You can turn client-side optimization On or Off by using the CLI commands, rda --update_client --name --mode. For more information about DR Series system CLI commands, see the DR Series System Command Line Reference Guide.
The plug-in must be installed on the designated Linux-based media server in the following directory, /usr/openv/lib/. The plug-in is installed using a self-extracting installer that installs the Rapid NFS plug-in and all of its related components. The installer supports the following modes, with the default being Help (-h):
You can download the plug-in installer from the Quest website:
• |
Go to support.quest.com/dr-series, select your specific DR Series model, and then navigate to Software Downloads. |
1. |
NOTE: If you want to do a mount on AIX, you must set the nfs_use_reserved_ports and portcheck parameters first. The parameters cannot be set to 0. For example: root@aixhost1 / # nfso -po portcheck=1 root@aixhost1 / # nfso -po nfs_use_reserved_ports=1 |
To ensure that the plug-in is running successfully, check the log file at: tail -f /var/log/oca/rdnfs.log.
You can download the plug-in installer from the Quest website as follows
3. |
Open a command prompt with the “Run as Administrator” option selected. To do this using the Windows Start menu, click Start → All Programs → Accessories. Right-click Command Prompt and select Run as Administrator. |
4. |
To ensure that the plug-in is running successfully, check the Windows Event log file.
© ALL RIGHTS RESERVED. Conditions d’utilisation Confidentialité Cookie Preference Center