Tchater maintenant avec le support
Tchattez avec un ingénieur du support

DR Series Software 4.0 - Administrator Guide

Introducing the DR Series system documentation Introducing the DR Series system Setting up the DR Series system Configuring the DR Series system settings Managing containers Managing replications Monitoring the DR Series system Using GlobalView Configuring and using Rapid NFS and Rapid CIFS Configuring and using Rapid Data Access with NetVault Backup and with vRanger Configuring and using RDA with OST
Understanding RDA with OST Guidelines Terminology Supported RDA with OST software and components Best Practices: RDA with OST and the DR Series System Setting client-side optimization Configuring an LSU Installing the RDA with OST plug-in Configuring DR Series system information using NetBackup Backing Up Data From a DR Series System (NetBackup) Using Backup Exec with a DR Series system (Windows) Understanding the OST CLI commands Understanding RDA with OST Plug-In Diagnostic Logs Collecting Diagnostics Using a Linux Utility Guidelines for Gathering Media Server Information
Configuring and using VTL Configuring and Using Encryption at Rest Support, maintenance, and troubleshooting Supported Ports in a DR Series System

For more information on DR Series system CLI commands, see the DR Series System Command Line Reference Guide.

Monitoring system alerts

Monitoring system alerts

You can easily view current system alerts in the DR Series system GUI.

The Alerts page displays a summary table of alerts listed by index number, timestamp of the system alert, and a brief message describing the alert.

Monitoring clients

Monitoring clients

You can easily view the current clients that are connection to the DR Series system. The Clients page displays a list of the clients that are connected to the DR Series system, which can include NFS, CIFS, RDA, OST, NDMP, iSCSI, and FC clients.

To view client information for the DR Series system, on the left navigation menu, click Dashboard > Clients.

The total number of currently active clients for a particular type is displayed next to the client name in the individual client panes.

2.
Name—the name of the NFS client.
Idle Time—the amount of idle time (non-activity) for the client.
Connection Time—the connection time for the client.
3.
Name—the name of the CIFS client.
Idle Time—the amount of idle time (non-activity) for the client.
Connection Time—the connection time for the client.
4.
Name — the name of the RDS or OST client.
IP Address—the IP address of the client.
Type—the type of RDA client.
Plug-in—the plug-in type installed on the client.
Backup Software—the backup software running on the client.
OS—the operating system of the client.
Idle Time—the amount of idle time (non-activity) for the client.
Connection—the number of connections for the client.
Mode—the current mode type that is set for the client, such as:
Auto: The DR Series system sets the deduplication as either Dedupe or Passthrough, based on the client’s number of cores and whether it is 32– or 64–bit.
Passthrough: The client passes all data to the DR Series system for deduplication processing (appliance-side deduplication).
Dedupe: The client processes hashing on data, so that deduplication processing occurs on the server side (client-side deduplication).
5.
ID — the

NDMP session ID.

Duration — The duration of the current active session.
State — The current status, for example, Active.
Source — IP address of the source filer.
Target — The target tape drive being used for the current NDMP session.
Throughput — The current and average throughput.
Transfer size — The total size of data transferred in this backup session.
DMA — The IP address of the Data Management Application initiating the backup.

The NDMP Completed Sessions Statistics section shows the above information for any completed NDMP sessions.

6.
Container Name—The container name for the iSCSI VTL container.
Container IQN—the iSCSI Qualified Name for the iSCSI VTL container.
Initiators Connected—the initiators connected to the iSCSI VTL container.
7.
Container Name—The container name for the iSCSI VTL container.
Container IQN—the iSCSI Qualified Name for the iSCSI VTL container.
Initiators Connected—the initiators connected to the iSCSI VTL container.
8.
Container Name—The container name of the FC VTL container.

Monitoring system events

Monitoring system events

You can easily view and filter current system events in the DR Series system GUI. To monitor DR Series system events, follow these steps:

On the left navigation menu, click Dashboard > Events.

The Events page displays a summary table of events listed by index number, severity (Informational, Warning, or Critical), timestamp of the event, and brief message describing the event.

2.
3.
Click Filter. Search results appear in the Events summary table.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation