Tchater maintenant avec le support
Tchattez avec un ingénieur du support

QoreStor 7.3.0 - User Guide

Introducing QoreStor Accessing QoreStor Configuring QoreStor settings
Licensing QoreStor Configuring SAML Configuring an SSL Certificate for your QoreStor System Configuring Active Directory settings Understanding system operation scheduling Configuring Secure Connect Enabling MultiConnect Configuring and using Rapid NFS and Rapid CIFS Configuring and using VTL Configuring and Using Encryption at Rest Configuring and using the Recycle Bin Configuring Cloud Reader Configuring RDA immutability
Managing containers Managing local storage Managing cloud storage Managing replications Managing users Monitoring the QoreStor system Managing QoreStor remotely Support, maintenance, and troubleshooting Security recommendations guide About us

Deleting a cloud tier

Before deleting a cloud tier, review the details below:

  • Only the files for whom the on-premises retention age applies and the file data which resides in the cloud will be removed locally.
  • Data in the cloud bucket has to be deleted manually.
  • Cloud policy settings on the source containers will be removed and the source container made available for cloud replication to a new cloud or archive tier.
  • When the Cloud Lock feature is used, the lock duration should have expired for all backups tiered to the cloud for the Cloud Tier to be deleted.

Deleting a cloud tier from the GUI

To delete a cloud tier, complete the following steps.

  1. In the navigation menu, click Cloud Storage to expand the menu, then select Cloud Tier.
  2. Click Delete.
  3. When prompted to confirm, click Delete.
  4. In the Passphrase field, enter the passphrase used for Cloud Tier encryption. This provides validation that the person deleting the cloud tier has the appropriate authorization.
  5. Review the containers linked to the cloud tier and confirm that data in these containers can be deleted. Any containers with managed replication configured must be deleted manually before the cloud tier can be deleted.
  6. Click Delete.

Deleting a cloud tier from the CLI

    Access the QoreStor CLI. Refer to Accessing the CLI commands for more information.
  1. Delete your cloud tier using the command below. Refer to the QoreStor Command Line Reference Guide for more information.
    cloud_tier --delete 
    
  2. At the prompt, enter y for yes and press [Enter].

Configuring a Cloud Archive Tier

Cloud Archive Tiers can be configured via the UI or via the cloud_tier command in the QoreStor CLI. Before configuring an archive tier, ensure the following requirements are met:

  • Your cloud storage must be configured prior to configuring a cloud or archive tier.
  • Archive tier is not supported when QoreStor is installed in Cloud Optimized mode or Object Direct Small mode.
  • Permissions for your cloud storage must be correctly configured. Refer to Configuring required permissions to restore from Archive Tier for more information.
  • Only RDA and VTL containers can be configured to tier data to Archive Tier.

NOTE: QoreStor's archive tier functionality relies on Amazon S3 Glacier and/or Amazon S3 Glacier Deep Archive storage. Before configuring an archive tier, your cloud archive storage must be properly configured. Please refer to the Amazon S3 documents below for more information:

Configuring required permissions to restore from Archive Tier

For QoreStor to perform batch operations for restoring objects to Amazon S3 storage from Amazon S3 Glacier or Amazon S3 Glacier Deep Archive storage, you must configure an AWS IAM policy with the required permissions and then attach the policy to your AWS account used to access the for accessing AWS S3 storage.

NOTE: When crating an archive tier after upgrading to QoreStor 7.1, the default mode of restores is Lambda. If you create the archive tier before upgrading to QoreStor 7.1, the upgrade automatically switches the restores from Batch operations to Lambda. To change this option, see Editing an archive tier restore mode using the command line interface.

To configure required permissions to restore from Archive Tier

  1. From the AWS console, go to the IAM dashboard.
  2. On the IAM dashboard, go to the Policies page, and then click Create Policy.
  3. On the Create policy page, click the JSON tab, and then copy and enter the text from the following JSON document:

    NOTE: Enter the "AWS Account ID" and the "S3 Archive Tier Bucket Name" as appropriate. Using "*" as a placeholder for the "S3 Archive Tier Bucket Name" may cause an unimportant warning, which you can ignore.

    JSON Create Policy document

    {
        "Version": "2012-10-17",
        "Statement": [
            {
                "Sid": "VisualEditor0",
                "Effect": "Allow",
                "Action": [
                    "s3:GetObject",
                    "s3:RestoreObject",           
                    "lambda:InvokeFunction"
                ],
                "Resource": [
                    "arn:aws:lambda:*:<AWS Account ID>:function:*",     
                    "arn:aws:s3:::<S3 Archive Tier Bucket Name | *>/*"
                ]
            },
            {
                "Sid": "VisualEditor1",
                "Effect": "Allow",
                "Action": "s3:PutObject",
                "Resource": "arn:aws:s3:::<S3 Archive Tier Bucket Name | *>/batch/*"
            }
        ]
    }

  4. Note the name of the new policy for the next steps. For example, GlacierTierRolePolicy.
  5. On the IAM dashboard Roles page, click Create Role.
  6. Select a trusted entity, select Custom trust policy, and then copy and enter the following JSON document:
    JSON Custom Trust Policy document
    {
      "Version": "2012-10-17",
      "Statement": [
        {
          "Effect": "Allow",
          "Principal": {
            "Service": "batchoperations.s3.amazonaws.com"
          },
          "Action": "sts:AssumeRole"
        },
        {
          "Effect": "Allow",
          "Principal": {
            "Service": "lambda.amazonaws.com"
          },
          "Action": "sts:AssumeRole"
        }
      ]
    }
  7. Add permissions by searching and selecting the policy you created, and then click Next.
  8. Give the new role a name and then note the ARN of the IAM Role for next steps. For example, arn:aws:iam::<AWS Account ID>:role/GlacierTierRole.
  9. Return to the Policies page of the IAM dashboard and click Create Policy.
  10. Select JSON for permissions, and then replace the JSON text with the following policy document and save it:

    NOTE: In the "Resource" portion, for "AWS Account ID" and "IAM Role Name," enter the specific Account ID and ARN of the role. Do not use the lambda function for batch restores. AWS requires you to use "*" in place of the bucket name.

    JSON Create Policy document
    {
     
        "Version": "2012-10-17",
     
        "Statement": [
     
            {
     
                "Sid": "VisualEditor0",
     
                "Effect": "Allow",
     
                "Action": [
     
                    "lambda:CreateFunction",
     
                    "iam:GetRole",
     
                    "lambda:InvokeFunction",
     
                    "lambda:GetFunction",
     
                    "lambda:UpdateFunctionConfiguration",
     
                    "s3:RestoreObject",
     
                    "s3:CreateBucket",
     
                    "lambda:GetFunctionConfiguration",
     
                    "s3:ListBucket",
     
                    "lambda:PutFunctionConcurrency",
     
                    "lambda:UpdateFunctionCode",
     
                    "s3:PutObject",
     
                    "s3:GetObject",
     
                    "iam:PassRole",
     
                    "lambda:GetFunctionConcurrency",
     
                    "lambda:DeleteFunction",
     
                    "lambda:DeleteFunctionConcurrency",
     
                    "s3:DeleteObject",
     
                    "s3:DeleteBucket"
     
                ],
     
                "Resource": [
        
            "arn:aws:iam::<AWS Account ID>:role/<IAM Role Name>",              
     
                   "arn:aws:lambda:*:<AWS Account ID>:function:QorestorArchiveRestore",   
     
            "arn:aws:s3:::*"                                                                                                
                ]
     
            },
     
            {
     
                "Sid": "VisualEditor1",
     
                "Effect": "Allow",
     
                "Action": "s3:ListAllMyBuckets",
     
                "Resource": "*"
     
            },
     
            {
     
                "Sid": "VisualEditor2",
     
                "Effect": "Allow",
     
                "Action": [
     
                    "s3:DescribeJob",
     
                    "s3:UpdateJobPriority",
     
                    "s3:UpdateJobStatus"
     
                ],
     
                "Resource": "arn:aws:s3:*:<AWS Account ID>:job/*"            
     
            },
     
            {
     
                "Sid": "VisualEditor3",
     
                "Effect": "Allow",
     
                "Action": [
     
                    "s3:ListJobs",
     
                    "s3:CreateJob"
     
                ],
     
                "Resource": "arn:aws:s3:*:<AWS Account ID>:job/*"
     
            }
     
        ]
     
    }

    The policy creation is complete. Check that the permissions you entered are saved in the policy JSON document.

  11. To create an IAM User for the archive tier, go to the Users page of the IAM dashboard, click Add User, and complete the following steps:
    1. On the Add user page under Select AWS access type, to generate the access_key and secret_key, select Programmatic access.
    2. On the Permissions page, select Attach existing policy directly, and then select the policy you created in Step 10 to attach to this user.
  12. Following the directions in the remaining two tabs to finish creating the user.

    NOTE: Be sure to download the access_keys for this user to use when creating an archive tier in QoreStor.

Modifying an Archive Tier after an upgrade

If you created an Archive Tier after an upgrade to QoreStor 7.1 or later release, then the default mode of restores is Lambda. If you created the Archive Tier prior to upgrading to QoreStor 7.1, then the upgrade process automatically switched the default restore mode from Batch operations to Lambda. To revert this change back to the Batch option, complete the following procedure in the CLI.

To modify an Archive Tier after an upgrade

  1. In the CLI, use the following commands:

    Restore mode change commands

    cloud_tier --update 
    [--cloud_password]
     
    [--cloud_archive]
     
    [--archive_retention_in_warm <1 to 365 days>]
     
    [--archive_role_arn <archive role arn>]
     
    [--archive_restore_type <Batch|Lambda>]
     
    [root@jayant-ol82-tst1 ~]
    # cloud_tier --update --archive_role_arn arn:aws:iam::177436582181:role/GlacierTierRole  --archive_restore_type Lambda --cloud_archive
    Validating Role-arn string format for group name DefaultCloudArchiveTier ...
    Role-arn string format is valid  We do basic format validation for the role ARN string. We cannot validate permissions at the time of addition/update – AWS does that during restore operation itself.
    Archive Tier updated successfully.
    [root@jayant-ol82-tst1 ~]
    #
     
     
  2. [root@jayant-ol82-tst1 ~]
    # cloud_tier --show --verbose --cloud_archive
    Cloud_tier Entry ID : 8
    Cloud_tier Name : DefaultCloudArchiveTier
    Cloud_tier Compression Type : Fast
    Cloud_tier Encryption Set : On
    Cloud_tier Encryption Type : Static
    Cloud_tier Rotate Period : 0
    Cloud_tier Passphrase set : Yes
    Cloud_tier Type : Cloud
    Cloud_tier Cloud container name : jayantcloud1
    Cloud_tier Cloud provider name : AWS-S3
    Cloud_tier Cloud archive service name : S3-Glacier
    Cloud_tier Archive retention in warm : 2 days
    Cloud_tier Archive role ARN string : arn:aws:iam::177436582181:role/GlacierTierRole 
    Cloud_tier Archive Restore Type : Lambda Function
    Cloud_tier Cloud connection string : loglevel=trace;region=us-east-1;
    Cloud_tier Created On : Mon Aug 9 14:29:07 2021 PDT
    Cloud_tier Created Bld : 24E2B069
    Cloud_tier status : Online
    Storage_group Is Storage Agent Group : No
    DefaultCloudArchiveTier's Containers
    ------------------------------------
    None
     
    [root@jayant-ol82-tst1 ~]
    #

Adding an archive tier

To add an archive tier

  1. In the navigation menu, click Cloud Storage to expand the menu, then click Archive Tier.
  2. In the Archive Tier pane, click Configure to add a cloud tier.
  3. In the archive provider drop-down, select AWS S3.
  4. Provide the name for your S3 bucket.
  5. Enter your Connection String using one of the two methods below:
    • Default - this option will compile your connection string into the correct format using the inputs below.
      • Access key - The access key is typically 20 upper-case English characters
      • Secret key - The secret key is generated automatically by AWS. It is typically 40 characters, including mixed upper and lower-case and special symbols.
      • Region - The region specifies the Amazon-specific region in which you want to deploy your backup solution. Your region name can be obtained from https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region
    • Custom - this option allows you to enter your connection string with additional parameters.
      • Your connection string uses the following syntax:
        "accesskey=<ABDCEWERS>;secretkey=< >; loglevel=warn; region=<aws-region>;"

        Please note the following:

        1. The access key is typically 20 upper-case English characters
        2. The secret key is generated automatically by AWS. It is typically 40 characters, including mixed upper and lower-case and special symbols.
        3. The region specifies the Amazon-specific region in which you want to deploy your backup solution. Your region name can be obtained from https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region

        An example of a connection string with this syntax follows. Logically, each connection string is unique.

        accesskey=AKIARERFUCFODHFJUCWK;secretkey=p+8/T+o5WeZkX11QbuPazHX1IdWbwgFplxuVlO8J;loglevel=warn;region=eu-central-1;
  6. Enable Use AWS intelligent Tiering for metadata to get some cost savings by storing Archive Tier metadata in the AWS S3 Intelligent Tiering storage class.
  7. To apply encryption, in the Archive Tier Encryption section enter the following:

    • Passphrase — the passphrase is user-defined and is used to generate a passphrase key that encrypts the file in which the content encryption keys are kept. The passphrase is a human readable key, which can be up to 255 bytes in length. It is mandatory to define a passphrase to enable encryption.

      IMPORTANT: It is mandatory to define a passphrase to enable encryption. If the passphrase is compromised or lost, the administrator should change it immediately so that the content encryption keys do not become vulnerable. If this passphrase is lost or forgotten, data in the cloud will be unrecoverable.

    • Confirm Passphrase — re-enter the passphrase used above.

  8. In the Archive Tier Options section, enter the following:
    • Archive Retention in Warm Cloud - When restore operation succeeds, a temporary copy of the Glacier object is created in standard S3 storage. This setting specifies the number of days this temporary copy is held in S3 before it is deleted. Valid values are any integral values from 1 through 365.
    • Archive Role ARN - S3 must have permissions to perform Lambda and batch operations on behalf of the user. An IAM role must be created that has "Create Job", "Pass Role" and other permissions to access the buckets as well as perform the Lambda and batch operations. The account admin is expected to create such roles.

      NOTE: For more information on required permissions and lambda and batch operations, refer to Configuring required permissions to restore from Archive Tier and the AWS documents Granting permissions for Amazon S3 Batch Operations, What is AWS Lambda?, and The basics: S3 Batch Operations.

    • Archive Service Name- Select between S3-Glacier or S3 Deep Archive.
  9. Click Configure. A Cloud Storage Group will be created.
  10. To enable replication to the cloud, you must link a local container to the cloud using the procedures in Adding a cloud tiering policy.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation