Tchater maintenant avec le support
Tchattez avec un ingénieur du support

KACE Systems Deployment Appliance 9.2 Common Documents - Administrator Guide

About the KACE Systems Deployment Appliance Getting started Using the Dashboard Configuring the appliance Setting up user accounts and user authentication Configuring security settings Preparing for deployment Managing device inventory Using labels Creating a Windows or Linux Boot Environment Managing drivers Capturing images Capturing user states Creating scripted installations Creating a task sequence Automating deployments Performing manual deployments Managing custom deployments Managing offline deployments About the Remote Site Appliance Importing and exporting appliance components Managing disk space Troubleshooting appliance issues Updating appliance software Glossary About us Legal notices

Assign tasks to system deployment

Assign tasks to system deployment

You can configure the steps on the appliance or a remote (RSA) appliance which are necessary (or required) to run a system deployment. Pre-installation tasks run before the operating system setup starts and mid-level tasks run after the operating system is deployed. Post-installation tasks run after the operating system reboots and the target devices are logged in for the first time.

You can only edit system images on the appliance that captured them. For example, if you view the details of a system image captured by the appliance, you can edit that image on the System Image Detail page in the appliance Administrator Console, but not in the KACE Remote Appliance Console. If that system image is captured on the appliance and synced to the RSA, the System Image Detail page in the KACE Remote Appliance Console only allows you to review the system image details, but not to edit them. A link appears on this page that allows you to quickly navigate to the System Image Detail in the appliance Administrator Console, and edit the system image, as required.

1.
On the left navigation pane, click Deployments, then click System Images to display the Systems Images page.
2.
Select the image to view the System Image Detail page.
3.
If you want to add any tasks specified in a task group, under Installation Plan, click Choose a task group, select a desired task group, and click Apply.
◦
Only those task groups associated with the OS of the selected system image appear in the list. For example, if you selected a Windows system image, the list displays the task groups that can be applied to Windows systems.
◦
You can add multiple task groups to a system image, scripted installation, or custom deployment.
◦
Tasks associated with task groups are always added to their respective deployment stages in a system image, scripted installation, or custom deployment. For example, when you add a task group, the pre-installation tasks from that task group will appear under Run Pre-installation Tasks.
◦
The order of tasks associated with the task groups that you add to a system image, scripted installation, or custom deployment reflect the order in which these task groups are added: the tasks added to the first task group appear at the top of the list, followed by the tasks associated with the task group that is added after the first one, and so on.
4.
If you want to delete all tasks previously added to the system deployment, including any tasks associated with task groups, click Clear All Tasks.
5.
Under Installation Plan, add the tasks in the order that you want the tasks to run.
To add a task to the installation plan, drag and drop it to the left column, click the plus sign, or double-click the task in the right column, as desired.
Available tasks are sorted alphabetically in each list on the right. If there are more than six available tasks in a list, expand the drawer to see the entire list, or scroll up or down, as needed.
a.
Add tasks from the Available Pre-installation Tasks column to the Run Pre-installation Tasks column.
* 
NOTE: If you choose to erase the drive contents, ensure that the Format C task follows the Create Single Partition task.
b.
Add tasks from the Available Mid-Level Tasks column to the Run Mid-Level Tasks column.
c.
Add tasks from the Available Post-installation Tasks column to the Run Post-installation Tasks column.
Tip:
 
TIP: Filters are available for each task type. For example, to look for a specific pre-installation task, in the Available Pre-Installation Tasks column, in the Filter Pre-Installation Tasks field, type the task name.
Tip:
 
TIP: To remove a task from the installation plan, drag and drop it to the right column, click the minus sign, or double-click the task in the left column.
Tip:
 
TIP: To remove all tasks from a column, click the button in the column header, on the right. For example, to remove all assigned pre-installation tasks, in the Run Pre-Installation Tasks column, in the column header bar, click Remove all Pre-Installation Tasks.
6.
KACE Systems Deployment Appliance only. Click Save.
7.
RSA only. Choose one of the following steps, as applicable:
◦
To attach the tasks to the image and synchronize the tasks from the appliance to the RSA, click Save and Sync.
◦
To only attach the tasks to the image and synchronize the tasks from the appliance to the RSA at a later time, click Save.
The System Image Detail page closes and the System Images list page appears. If you selected Save and Sync, a message at the top of the page indicates that the changes made to the system image are being synchronized with the appliance. When the process finishes, the updated system image is now available for deployment from the RSA. For information on how to deploy system images, see Deploy the image manually.

Assign tasks to scripted installation deployment

Assign tasks to scripted installation deployment

You can configure the steps that the appliance takes to run a scripted installation deployment. Pre-installation tasks run before the operating system setup starts and mid-level tasks run after the operating system is deployed. Post-installation tasks run after the operating system reboots and the target devices are logged in for the first time.

1.
On the left navigation pane, click Deployments, then click Scripted Installations to display the Scripted Installations page.
2.
Select the scripted installation to view the Scripted Installation Detail page.
3.
If you want to add any tasks specified in a task group, click Choose a task group, select a desired task group, and click Apply.
◦
Only those task groups associated with the OS of the selected system image appear in the list. For example, if you selected a Windows system image, the list displays the task groups that can be applied to Windows systems.
◦
You can add multiple task groups to a system image, scripted installation, or custom deployment.
◦
Tasks associated with task groups are always added to their respective deployment stages in a system image, scripted installation, or custom deployment. For example, when you add a task group, the pre-installation tasks from that task group will appear under Run Pre-installation Tasks.
◦
The order of tasks associated with the task groups that you add to a system image, scripted installation, or custom deployment reflect the order in which these task groups are added: the tasks added to the first task group appear at the top of the list, followed by the tasks associated with the task group that is added after the first one, and so on.
4.
If you want to delete all tasks previously added to the scripted installation deployment, including any tasks associated with task groups, under Installation Plan, click Clear All Tasks.
5.
Under Installation Plan, add the tasks in the order that you want the tasks to run.
To add a task to the installation plan, drag and drop it to the left column, click the plus sign, or double-click the task in the right column, as desired.
Available tasks are sorted alphabetically in each list on the right. If there are more than six available tasks in a list, expand the drawer to see the entire list, or scroll up or down, as needed.
a.
Add tasks from the Available Pre-installation Tasks column to the Run Pre-installation Tasks column.
* 
NOTE: If you choose to erase the drive contents, ensure that the Format C task follows the Create Single Partition task.
b.
Add tasks from the Available Mid-Level Tasks column to the Run Mid-Level Tasks column.
c.
Add tasks from the Available Post-installation Tasks column to the Run Post-installation Tasks column.
Tip:
 
TIP: Filters are available for each task type. For example, to look for a specific pre-installation task, in the Available Pre-Installation Tasks column, in the Filter Pre-Installation Tasks field, type the task name.
Tip:
 
TIP: To remove a task from the installation plan, drag and drop it to the right column, click the minus sign, or double-click the task in the left column.
Tip:
 
TIP: To remove all tasks from a column, click the button in the column header, on the right. For example, to remove all assigned pre-installation tasks, in the Run Pre-Installation Tasks column, in the column header bar, click Remove all Pre-Installation Tasks.
6.
Click Save.

Assign tasks to custom deployment

Assign tasks to custom deployment

You can configure the steps that the appliance takes to run a custom deployment. Pre-installation tasks run before the operating system setup starts and mid-level tasks run after the operating system is deployed. Post-installation tasks run after the operating system reboots and the target devices are logged in for the first time.

1.
On the left navigation pane, click Deployments, then click Custom Deployments to display the Custom Deployments page.
2.
On the Custom Deployments page, click a custom deployment name to display the Custom Deployment Detail page for the selected item.
3.
If you want to add any tasks specified in a task group, click Choose a task group, select a desired task group, and click Apply.
◦
Only those task groups associated with the OS of the selected system image appear in the list. For example, if you selected a Windows system image, the list displays the task groups that can be applied to Windows systems.
◦
You can add multiple task groups to a system image, scripted installation, or custom deployment.
◦
Tasks associated with task groups are always added to their respective deployment stages in a system image, scripted installation, or custom deployment. For example, when you add a task group, the pre-installation tasks from that task group will appear under Run Pre-installation Tasks.
◦
The order of tasks associated with the task groups that you add to a system image, scripted installation, or custom deployment reflect the order in which these task groups are added: the tasks added to the first task group appear at the top of the list, followed by the tasks associated with the task group that is added after the first one, and so on.
4.
If you want to delete all tasks previously added to the custom deployment, including any tasks associated with task groups, under Installation Plan, click Clear All Tasks.
5.
Under Installation Plan, add the tasks in the order that you want the tasks to run.
To add a task to the installation plan, drag and drop it to the left column, click the plus sign, or double-click the task in the right column, as desired.
Available tasks are sorted alphabetically in each list on the right. If there are more than six available tasks in a list, expand the drawer to see the entire list, or scroll up or down, as needed.
a.
Add tasks from the Available Pre-installation Tasks column to the Run Pre-installation Tasks column.
* 
NOTE: If you choose to erase the drive contents, ensure that the Format C task follows the Create Single Partition task.
b.
Add tasks from the Available Mid-Level Tasks column to the Run Mid-Level Tasks column.
c.
Add tasks from the Available Post-installation Tasks column to the Run Post-installation Tasks column.
Tip:
 
TIP: Filters are available for each task type. For example, to look for a specific pre-installation task, in the Available Pre-Installation Tasks column, in the Filter Pre-Installation Tasks field, type the task name.
Tip:
 
TIP: To remove a task from the installation plan, drag and drop it to the right column, click the minus sign, or double-click the task in the left column.
Tip:
 
TIP: To remove all tasks from a column, click the button in the column header, on the right. For example, to remove all assigned pre-installation tasks, in the Run Pre-Installation Tasks column, in the column header bar, click Remove all Pre-Installation Tasks.
6.
Click Save.

Edit deployment tasks

Edit deployment tasks

You can edit tasks associated with system image or scripted installation deployments. Each task represents a step that the appliance takes to run a system image or scripted installation deployment. Pre-installation tasks run before the operating system setup starts, and post-installation tasks run after the operating system is deployed and the target devices are logged in for the first time.

System image deployment tasks only. You can only edit system image deployment tasks when you are using the appliance Administrator console. The KACE Remote Site Appliance does not allow you to edit any task parameters. That is because the System Image Detail page in the KACE Remote Site Appliance displays all tasks that exist on the associated appliance, and therefore they can only be edited in that KACE SDA's Administrator console.

1.
Complete one of the following steps:
◦
On the left navigation pane, choose Deployments > System Images to display the System Images page. Then click a system image name to display the System Image Detail page.
◦
On the left navigation pane, choose Deployments > Scripted Installations to display the Scripted Installation page. Then click a scripted installation name to display the Scripted Installation Detail page.
◦
On the left navigation pane, choose Deployments > Custom Deployments to display the Custom Deployments page. Then click a custom deployment name to display the Custom Deployments Detail page.
2.
Under Installation Plan, locate the task that you want to edit, and click .
Tip:
 
TIP: Filters are available for each task type. For example, to look for a specific pre-installation task, in the Available Pre-Installation Tasks column, in the Filter Pre-Installation Tasks field, type the task name.
Tip:
 
TIP: To remove a task from the installation plan, drag and drop it to the right column, click the minus sign, or double-click the task in the left column.
A dialog box appears, showing the task details.
3.
Edit the task, as required.

Option

Description

File

To replace a file associated with the task (if available), click Replace, and select the appropriate file.

Parameters

Edit the task parameters, as required.

Notes

Add a note about the task. For example, John's task to create a partition.

4.
BAT scripts only. In the BAT Script box, type the name of the BAT script.
5.
DISKPART scripts only. In the DISKPART Script box, type the name of the DISKPART script.
6.
Click Save to close the dialog box.
7.
On the System Image Detail or Scripted Installation Detailpage, click Save.
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation