Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Recovery Manager for AD Disaster Recovery Edition 10.3 - Management Shell Guide

Overview
About Management Shell Installing and opening Management Shell Getting Help Descriptions of PowerShell Commands
Add-RMADBackup Add-RMADCollectionItem Add-RMADFECloudStorage Add-RMADReplicationConsole Add-RMADStorageServer Add-RMADStorageServerException Backup-RMADCollection Backup-RMADFEConsoleConfiguration Close-RMADFEProject Compare-RMADObject Convert-RMADBackup ConvertTo-RMADRecycledObject Copy-RMADFEBackup Create-RMADStorageAgentSetup Expand-RMADBackup Export-RMADBackup Export-RMADFECloudStorageBackup Export-RMADFECloudStorageServers Export-RMADFERecoveryCertificate Export-RMADFEResult Export-RMADSecureStorageBackup Export-RMADStorageServers Get-RMADBackup Get-RMADBackupAgent Get-RMADBackupInfo Get-RMADBackupObject Get-RMADBackupSecurityStatus Get-RMADCollection Get-RMADCollectionItem Get-RMADDeletedObject Get-RMADFEAvailableSubnet Get-RMADFECloudStorage Get-RMADFECloudStorageCollection Get-RMADFECloudStorageUploadSession Get-RMADFEComputer Get-RMADFEConsole Get-RMADFEConsoleConfigurationBackupSchedule Get-RMADFEConsoleConfigurationProjectFiles Get-RMADFEDnsCache Get-RMADFEDomain Get-RMADFEEvent Get-RMADFEGlobalOptions Get-RMADFEOperation Get-RMADFEPersistenceConnection Get-RMADFEProject Get-RMADFERecoveryAgent Get-RMADFESchedule Get-RMADGlobalOptions Get-RMADHybridRecoveryDomainOptions Get-RMADHybridRecoveryOptions Get-RMADLicenseInfo Get-RMADObject Get-RMADReplicationConsole Get-RMADReplicationSchedule Get-RMADReplicationSession Get-RMADReplicationSessionItem Get-RMADReportObject Get-RMADReportObjectAttributes Get-RMADReportObjectChildren Get-RMADReportSession Get-RMADSession Get-RMADSessionItem Get-RMADSessionItemEvent Get-RMADStorageServer Get-RMADStorageServerAllowedVolumes Get-RMADStorageServerException Get-RMADStorageServerHardeningStatus Get-RMADStorageServerRetentionPolicy Import-RMADBackup Import-RMADFERecoveryCertificate Install-RMADBackupAgent Install-RMADFERecoveryAgent New-RMADCollection New-RMADFEProject New-RMADFERecoveryMedia New-RMADSchedule Open-RMADFEProject Protect-RMADSecureStorageServer Protect-RMADStorageServer Publish-RMADBackupSecurityStatus Refresh-RMADStorageServer Register-RMADSecureStorageBackups Remove-RMADBackup Remove-RMADBackupAgent Remove-RMADCollection Remove-RMADCollectionItem Remove-RMADFECloudStorage Remove-RMADFECloudStorageUploadSession Remove-RMADFERecoveryAgent Remove-RMADFESchedule Remove-RMADReplicationConsole Remove-RMADReplicationSchedule Remove-RMADReplicationSession Remove-RMADStorageServer Remove-RMADStorageServerException Remove-RMADUnpackedComponent Rename-RMADCollection Restart-RMADFECloudStorageUploadSession Restore-RMADDeletedObject Restore-RMADDomainController Restore-RMADFEConsoleConfiguration Restore-RMADObject Resume-RMADFEOperation Resume-RMADFERecovery Save-RMADFEProject Set-RMADCollection Set-RMADFECloudStorage Set-RMADFECloudStorageCollection Set-RMADFEComputer Set-RMADFEConsoleConfigurationBackupSchedule Set-RMADFEConsoleConfigurationProjectFiles Set-RMADFEDnsCache Set-RMADFEDomain Set-RMADFEGlobalOptions Set-RMADFEPersistenceConnection Set-RMADFERecoveryMode Set-RMADFESchedule Set-RMADGlobalOptions Set-RMADHybridRecoveryDomainOptions Set-RMADHybridRecoveryOptions Set-RMADReplicationConsole Set-RMADReplicationSchedule Set-RMADStorageServerAllowedVolumes Set-RMADStorageServerRetentionPolicy Start-RMADFERecovery Start-RMADFERecoveryAgentOperation Start-RMADFEVerification Start-RMADHybridRecoveryDiscovery Start-RMADReplication Start-RMADReportViewer Stop-RMADFECloudStorageUploadSession Stop-RMADFEWorkflow Test-RMADBackup Test-RMADSecureStorageBackup Unprotect-RMADStorageServer Update-RMADBackupAgent Update-RMADFEProject Update-RMADLicense

Save-RMADFEProject


external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:

schema: 2.0.0

SYNOPSIS

Saves the RMADFE project.

SYNTAX

Save-RMADFEProject [-Path] <String> [-Password] <SecureString> [<CommonParameters>]

DESCRIPTION

This cmdlet saves the RMADFE project to the specified location. You must also supply the password that is used to access the project content.

EXAMPLES

EXAMPLE 1

PS C:\> Save-RMADFEProject -Path C:\RMADFeProjects\SampleProject.frproj -Password (ConvertTo-SecureString "project password" -AsPlainText -Force)

This command saves SampleProject.frproj to the specified location.

PARAMETERS

-Password

Specifies the password that is used to access the RMADFE project content.

Type: SecureString
Parameter Sets: (All)
Aliases:

Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Path

Specifies the full path to the RMADFE project file.

Type: String
Parameter Sets: (All)
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

OUTPUTS

NOTES

RELATED LINKS

 

Set-RMADCollection


external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:

schema: 2.0.0

SYNOPSIS

Sets properties for a computer collection.

SYNTAX

Name (Default)

Set-RMADCollection [-Name] <String[]> [-BackupComponents <BackupComponents>] [-Properties <Hashtable>]
 [-Schedule <Schedule[]>] [-ScheduleCredential <PSCredential>] [-AgentCredentialEnabled <Boolean>]
 [-AgentCredential <PSCredential>] [-StorageCredentialEnabled <Boolean>] [-StorageCredential <PSCredential>]
 [-ConsoleStorageCredential <PSCredential>] [-SecondaryStorageCredential <PSCredential>]
 [-RetentionPolicyEnabled <Boolean>] [-RetentionPolicyCount <Int32>] [-PassThru] [-IgnoreReadOnly] [-WhatIf]
 [-Confirm] [<CommonParameters>]

InputObject

Set-RMADCollection [-InputObject] <ComputerCollection[]> [-BackupComponents <BackupComponents>]
 [-Properties <Hashtable>] [-Schedule <Schedule[]>] [-ScheduleCredential <PSCredential>]
 [-AgentCredentialEnabled <Boolean>] [-AgentCredential <PSCredential>] [-StorageCredentialEnabled <Boolean>]
 [-StorageCredential <PSCredential>] [-ConsoleStorageCredential <PSCredential>]
 [-SecondaryStorageCredential <PSCredential>] [-RetentionPolicyEnabled <Boolean>]
 [-RetentionPolicyCount <Int32>] [-PassThru] [-IgnoreReadOnly] [-WhatIf] [-Confirm] [<CommonParameters>]

Id

Set-RMADCollection [-Id] <Int32[]> [-BackupComponents <BackupComponents>] [-Properties <Hashtable>]
 [-Schedule <Schedule[]>] [-ScheduleCredential <PSCredential>] [-AgentCredentialEnabled <Boolean>]
 [-AgentCredential <PSCredential>] [-StorageCredentialEnabled <Boolean>] [-StorageCredential <PSCredential>]
 [-ConsoleStorageCredential <PSCredential>] [-SecondaryStorageCredential <PSCredential>]
 [-RetentionPolicyEnabled <Boolean>] [-RetentionPolicyCount <Int32>] [-PassThru] [-IgnoreReadOnly] [-WhatIf]
 [-Confirm] [<CommonParameters>]

DESCRIPTION

Sets properties for the Recovery Manager computer collection you specify.

EXAMPLES

Example 1

PS C:\> Set-RMADCollection -Name Collection1 -BackupComponents ActiveDirectory,Registry,GroupMembership,ForestRecoveryMetadata

This command sets properties for the computer collection named Collection1.

Example 2

PS C:\> Set-RMADCollection * -RetentionPolicyEnabled $false

This command disables all backup retention policies for all existing computer collections.

Example 3

PS C:\> $c = Get-RMADCollection | Where-Object { $_.AgentCredentialEnabled -eq $true }

C:\PS>$cred = Get-Credential

C:\PS>Set-RMADCollection -InputObject $c -AgentCredential $cred

The first command in this example gets objects representing the computer collections whose properties are set to access Backup Agent and backup files with a specific user account. Then the command saves the computer collection objects in the $c variable.

Example 4

PS C:\> $a = Get-RMADCollection -Name "Collection1"

C:\PS>Set-RMADCollection -InputObject $a[1] -Properties @{BackupComponents="ActiveDirectory","BootFiles"; UsePreinstalledAgent=$true}

In the first line of this example, the Get-RMADCollection cmdlet gets the Computer Collection whose name is Collection1 and saves it to the $a variable. In the second line of this example, the Set-RMADCollection cmdlet sets the components to be backed up (that is, Active Directory and boot files) and specifies to use preinstalled Backup Agent for backup operations. For a complete list of items you can include in the braces, see the description of the Properties parameter.

Example 5

PS C:\> $schedule=(New-RMADSchedule -Daily -StartDate "9/20/2022 10:00" -DaysInterval 1), (New-RMADSchedule -Daily -StartDate "9/20/2022 22:00" -DaysInterval 1)

C:\PS>Set-RMADCollection -InputObject $col -Properties @{EnableEmailLog=$true; EmailLogTo="administrator@mydomain.com"; EmailLogLevel="Everything"}

This example illustrates how to back up a Computer Collection by using two backup schedules. The first line of this example creates two backup creation schedules and stores them in the $schedule variable. One schedule invokes the backup operation once in every two days at 10 a.m. Another schedule invokes the backup operation once in every two days at 10 p.m. The two backup schedules become effective starting from the 20th September 2022. The second line of this example enables e-mail notifications for the Computer Collection. The recipient address for e-mail notifications is administrator@mydomain.com. The e-mail notifications provide information about all backup events.

Example 6

PS C:\> $cred = Get-Credential

C:\PS>Set-RMADCollection -Name MyCollection -Properties @{AgentSideScriptBeforeBackupEnabled = $true; AgentSideScriptBeforeBackup = 'Set-Disk -Number 5 -IsOffline $false'; AgentSideScriptAfterBackupEnabled = $true; AgentSideScriptAfterBackup = 'Set-Disk -Number 5 -IsOffline $true'; AgentSideScriptCredential = $cred}

This example illustrates how to customize your environment by running PowerShell scripts on the domain controller before and after creating a backup.

PARAMETERS

-AgentCredential

Specifies the credentials for the account you want to use to access Backup Agent installed on the DCs in the computer collection and locations where backup files for the computer collection will be saved. TO enable using the account whose credentials you supply in this parameter, use the AgentCredentialEnabled parameter.

Type: PSCredential
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AgentCredentialEnabled

Specifies to use a particular account to access Backup Agent installed on the DCs in the computer collection and locations where backup files for the computer collection will be saved. To specify the credentials for the account, use the AgentCredential parameter.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BackupComponents

Use this parameter to specify the names of the System State components you want to back up.

Type: BackupComponents
Parameter Sets: (All)
Aliases:
Accepted values: None, ActiveDirectory, Adam, BootFiles, CertificateServer, ClusterQuorum, EnterpriseServices, ForestRecoveryMetadata, GroupMembership, IisMetabase, PerformanceCounters, Registry, CryptoKeys, All

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConsoleStorageCredential

Specifies the credentials for the account you want to use to access local (console) backup files for the computer collection.

Type: PSCredential
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Id

Specifies the identifier of the computer collection whose properties you want to set.

Type: Int32[]
Parameter Sets: Id
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False

-IgnoreReadOnly

Allows you to perform the action in a console currently performing full replication.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Renames the computer collection represented by the specified collection objects. Specify the name of the variable that contains the objects or type a command or expression that gets the objects.

Type: ComputerCollection[]
Parameter Sets: InputObject
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-Name

Specifies the name of the computer collection whose properties you want to set.

Type: String[]
Parameter Sets: Name
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False

-PassThru

Passes the computer collection whose properties you have set along the pipeline. If this parameter is omitted, the computer collection is not passed along the pipeline.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-Properties

Allows you to modify the Computer Collection properties.
To specify the properties you want to modify, use an associative array or hash table. For more information, see the Windows PowerShell help topic on associative arrays (hash tables). To open the topic, at the PoweShell command prompt enter the following: help about_associative_arrayBelow are the properties you can modify by using this parameter. The properties are grouped by the names of tabs in the "Computer Collection Properties" dialog box, because each property corresponds to an option on these tabs. To assign a new value to a property, use the following format: PropertyName=Value

  • UseAlternateStoragePath - Specifies whether to store a copy of each backup in an alternate location. Can take one of these values: $true, $false.
  • AlternateStoragePath - Specifies a storage path format for the alternate location. Surround the path with double quotes.
  • AgentCredentialEnabled - Causes the Recovery Manager console to use a specified user account to access the Backup Agent and backup files on target computers. Can take one of these values: $true, $false.
  • AgentCredential - Specifies the account under which the Recovery Manager console accesses the Backup Agent and backup files, in the form of a PSCredential object. Use the Get-Credential cmdlet provided by Windows PowerShell to pass a PSCredential object to this parameter.
  • ConfigureFirewall - Specifies whether Recovery Manager automatically configures Windows Firewall on target Windows Server 2008-based or Windows Server 2012-based DCs to allow backup operations. Can take one of these values: $true, $false.
  • UsePreinstalledAgent - Specifies whether Recovery Manager automatically preinstalls the Backup Agent. Can take one of these values: $true, $false.
  • DeployForestRecoveryAgent - Specifies whether Recovery Manager verifies that the Forest Recovery Agent is installed on each domain controller in the Computer Collection. Can take one of these values: $true, $false.
  • BackupDescription - Specifies a description for the backups to be created for the Computer Collection. The description may include expressions, such as %COMPUTERNAME% and %DATETIME%.
  • BackupPasswordEnabled - Specifies whether to protect the backups with a password. Can take one of these values: $true, $false.
  • BackupPassword - Specifies a password to protect the backups. The value must be a SecureString object.
  • ConsoleSideBackupEnabled - Specifies to store backups on the Recovery Manager computer or on a Universal Naming Convention (UNC) share. Can take one of these values: $true, $false.
  • ConsoleSideBackupPath - Specifies a storage path format for backup files. The path format can include expressions, such as %COMPUTERNAME% and %DATETIME%. Surround the path format with double quotes.
  • ConsoleSideRetentionPolicyEnabled - Specifies whether to apply a retention policy to backups stored at the path provided in the ConsoleSideBackupPath parameter. Can take one of these values: $true, $false.
  • ConsoleSideRetentioPolicyCount - Specifies the number of the most recent backups to retain. Other backups are automatically deleted.
  • AgentSideBackupEnabled - Specifies to store backups on the backed-up DC or on a Universal Naming Convention (UNC) share. Can take one of these values: $true, $false.
  • AgentSideBackupPath - Specifies a storage path format for backup files. The path format can include expressions, such as %COMPUTERNAME% and %DATETIME%. Surround the path format with double quotes.
  • AgentSideRetentionPolicyEnabled - Specifies whether to apply a retention policy to backups stored at the path provided in the ConsoleSideBackupPath parameter. Can take one of these values: $true, $false.
  • AgentSideRetentionPolicyCount - Specifies the number of the most recent backups to retain. Other backups are automatically deleted.
  • StorageCredentialEnabled - Causes the Recovery Manager console to use a specified user account to access backup files on target computers. Can take one of these values: $true, $false.
  • StorageCredential - Specifies the account under which the Recovery Manager Backup Agent accesses the backup files, in the form of a PSCredential object. Use the Get-Credential cmdlet provided by Windows PowerShell to pass a PSCredential object to this parameter.
  • EnableEmailLog - Specifies whether to send information about backup creation sessions by e-mail. Can take one of these values: $true, $false.
  • EnableEmailLogOnlyOnErrors - Specifies to send information over e-mail only when an error occurs. Can take one of these values: $true, $false.
  • EmailLogLevel - Specifies the type of information to send over e-mail. Possible values: "Everything", "ErrorsOnly".
  • EmailLogTo - Specifies the recipient's e-mail address to send the information about backup creation sessions.
  • EnableApplicationLog - Specifies whether to write information about backup creation sessions to the Windows application log on the Recovery Manager computer. Can take one of these values: $true, $false.
  • EnableApplicationLogOnlyOnErrors - Specifies whether to create an Application log event only upon backup creation session errors or warnings. Can take one of these values: $true, $false.
  • ApplicationLogLevel - Specifies the type of information to write to the Application log. Possible values: "Everything", "ErrorsOnly".
  • EnableLogFile - Specifies whether to write information about backup creation sessions to the additional text file you specify. Can take one of these values: $true, $false.
  • EnableLogFileOnlyOnErrors - Specifies whether to write information to the additional text file only upon backup creation session errors or warnings. Can take one of these values: $true, $false.
  • LogFileLevel - Specifies the type of information to write to the additional text file. Possible values: "Everything", "ErrorsOnly".
  • LogFileName - Specifies a path and name for the additional text file.
  • LogFileAppend - Specifies whether to append information to the additional text file. Can take one of these values: "True", "False".
  • ExtendedLogging - Specifies the logging settings for DCs in the collection. Can take one of these values: Use global (default) - use settings from the root node: Recovery Manager for Active Directory->Settings…>Logging, Yes - for all DCs in the current collection: for logs will be used the "Trace" option, No - for all DCs in the current collection: in logs will be only Warnings and Error messages.
  • CompressionMethod - Specifies a method to compress the backups to be created. Can take one of these values: "None", "Fast", "Normal", "Maximum".
  • ParallelBackups - Specifies the maximum number of computers serviced in parallel when creating backups. Increasing this number can speed the backup creation, however, this may result in network saturation and slow network response.
  • EnableTransferRateLimit - Specifies whether to limit the total bandwidth used by the Backup Agent when transferring data over the network. Use this property to prevent the Backup Agent from generating excessive network traffic. Can take one of these values: $true, $false.
  • TransferRaleLimit - Specifies the bandwidth limit in Mbits/sec for the Backup Agent.
  • EnableCpuUsageLimit - Specifies whether to limit the CPU processing time used by the Backup Agent on each computer. Can take one of these values: $true, $false.
  • CpuUsageLimit88 - Specifies the CPU processing limit in percent.
  • ScheduleEnabled - Specifies whether to enable backup creation schedule. Can take one of these values: $true, $false.
  • Schedule - Sets up a backup creation schedule. To set up a schedule, use the New-RMADSchedule cmdlet.
  • ScheduleCredential - Specify the user account under which the Task Scheduler performs backup creation tasks, in the form of a PSCredential object. Use the Get-Credential cmdlet provided by Windows PowerShell to pass a PSCredential object to this parameter.
  • BackupComponents - Specifies the system state components to back up. Possible values: "All", "None", "ActiveDirectory", "Adam", "BootFiles", "CertificateServer", "ClusterQuorum", "EnterpriseServices", "ForestRecoveryMetadata", "GroupMembership", "IisMetabase", "PerformanceCounters", "Registry". When specifying multiple values, use a comma as a separator.
  • CollectGroupMembership - Specifies whether to back up group membership data stored on Global Catalog servers. Can take one of these values: $true, $false.
  • CollectForestRecoveryMetadata - Specifies whether to create backups that can be used to recover the Active Directory forest. Can take one of these values: $true, $false.
  • OverrideDefaultBackupUnpackSettings - Specifies whether to override the global settings for unpacking backups for the Computer Collection. Can take one of these values: $true, $false.
  • UnpackBackupsUponCreation - Specifies whether to unpack each backup upon its creation. Can take one of these values: $true, $false.
  • UnpackedBackupsToKeep - Specifies the number of the most recent unpacked backups to retain. Other unpacked backups are automatically deleted.
  • IsUnpackOnlySelected - Specifies whether to keep unpacked backups only for a list of selected domain controllers. Can take one of these values: $true, $false.
  • SelectedDCsToUnpack - Specifies the names (separated by comma) of domain controllers you want to keep unpacked backups for.

Type: Hashtable
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RetentionPolicyCount

Specifies the number of latest backups you want to keep for each DC in the computer collection. To enable the deletion of obsolete backups, use the RetentionPolicyEnabled parameter.

Type: Int32
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RetentionPolicyEnabled

Specifies to delete obsolete backups for particular computer collection. To set the number of latest backups you want to keep for each DC in the computer collection, use the RetentionPolicyCount parameter.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Schedule

Causes the computer collection you specify to use the backup creation schedule you set by using the New-RMADSchedule cmdlet.

Type: Schedule[]
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ScheduleCredential

Specifies the user account under which the scheduled backup creation task will be run. This account must have sufficient permissions to back up the computer collection you specify.

Type: PSCredential
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SecondaryStorageCredential

Specifies the credentials for the account you want to use to Tier 1 remote storage to copy backups to the secondary storage like Secure Storage Server or Cloud Storage.

Type: PSCredential
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StorageCredential

Specifies the credentials for the account you want to use to access locations where backup files for the computer collection will be saved. To enable using the account whose credentials you supply in this parameter, use the StorageCredentialEnabled parameter.

Type: PSCredential
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StorageCredentialEnabled

Specifies to use a particular account to access locations where backup files for the computer collection will be saved. To specify the credentials for the account, use the StorageCredential parameter.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Prompts for a confirmation before executing the command.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Describes what would happen if you ran the command without actually running the command.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

OUTPUTS

NOTES

RELATED LINKS

 

Set-RMADFECloudStorage


external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:

schema: 2.0.0

SYNOPSIS

Updates cloud storage in the Recovery Manager.

SYNTAX

IdAzureProviderSet

Set-RMADFECloudStorage [-Id] <Int32[]> [-DisplayName <String>] [-Container <String>]
 -AzureConnectionString <String> [-PassThru] [-IgnoreReadOnly] [<CommonParameters>]

IdAwsProviderSet

Set-RMADFECloudStorage [-Id] <Int32[]> [-DisplayName <String>] [-Container <String>] -AwsAccessKey <String>
 -AwsSecretKey <String> [-PassThru] [-IgnoreReadOnly] [<CommonParameters>]

InputObjectAzureProviderSet

Set-RMADFECloudStorage [-InputObject] <CloudStorage[]> [-DisplayName <String>] [-Container <String>]
 -AzureConnectionString <String> [-PassThru] [-IgnoreReadOnly] [<CommonParameters>]

InputObjectAwsProviderSet

Set-RMADFECloudStorage [-InputObject] <CloudStorage[]> [-DisplayName <String>] [-Container <String>]
 -AwsAccessKey <String> -AwsSecretKey <String> [-PassThru] [-IgnoreReadOnly] [<CommonParameters>]

DESCRIPTION

Updates properties for the registered cloud storage in Recovery Manager for Active Directory.

EXAMPLES

Example 1

PS C:\>  Set-RMADFECloudStorage -Id 7 -DisplayName "MyStorage" -AzureConnectionString "..." -Container "MyContainer"

Updates cloud storage settings for the Azure cloud storage with the Id 7.

Example 2

PS C:\>  Set-RMADFECloudStorage -Id 7 -DisplayName "MyStorage" -AwsAccessKey "..." -AwsSecretKey "..." -Container "MyContainer"

Updates cloud storage settings for the AWS cloud storage with the Id 7.

PARAMETERS

-AwsAccessKey

AWS access key ID

Type: String
Parameter Sets: IdAwsProviderSet, InputObjectAwsProviderSet
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AwsSecretKey

AWS secret key ID

Type: String
Parameter Sets: IdAwsProviderSet, InputObjectAwsProviderSet
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AzureConnectionString

Microsoft Azure connection string or Shared Access Signature token

Type: String
Parameter Sets: IdAzureProviderSet, InputObjectAzureProviderSet
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Container

Name of container in storage account. Backups will be copied to this location.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisplayName

Cloud storage display name for the registered storage in Recovery Manager for Active Directory.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Id

Specifies the cloud storage Id representing the storage you want to update.

Type: Int32[]
Parameter Sets: IdAzureProviderSet, IdAwsProviderSet
Aliases: StorageId

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False

-IgnoreReadOnly

Allows you to perform the action in a console currently performing full replication (for internal use only).

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Specifies the CloudStorage object representing the storage you want to update.

Type: CloudStorage[]
Parameter Sets: InputObjectAzureProviderSet, InputObjectAwsProviderSet
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-PassThru

Passes the modified cloud storage along the pipeline. If this parameter is omitted, the modified cloud storage is not passed along the pipeline.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

System.Int32[]

QuestSoftware.RecoveryManager.AD.FE.PowerShell.CloudStorage[]

OUTPUTS

System.Object

NOTES

RELATED LINKS

 

Set-RMADFECloudStorageCollection


external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:

schema: 2.0.0

SYNOPSIS

Configure a computer collection to use a registered cloud storage.

SYNTAX

Id

Set-RMADFECloudStorageCollection [-Collection <ComputerCollection[]>] [-CollectionId <Int32[]>] [-Id] <Int32[]>
 [-IgnoreReadOnly] [<CommonParameters>]

InputObject

Set-RMADFECloudStorageCollection [-Collection <ComputerCollection[]>] [-CollectionId <Int32[]>]
 [-InputObject] <CloudStorage[]> [-IgnoreReadOnly] [<CommonParameters>]

DESCRIPTION

Configure a computer collection to use a registered cloud storage. Backups from the specified computer collections will be copied to the cloud storage. Multiple computer collections can use a cloud storage account.

EXAMPLES

Example 1

PS C:\> Set-RMADFECloudStorageCollection -Id 2 -CollectionId @(1,2,3)

Specifies the computer collections with Id 1, 2 and 3 to copy backups to the cloud storage with Id 2.

PARAMETERS

-Collection

Computer collection object.

Type: ComputerCollection[]
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CollectionId

Id of computer collection to copy backups from to cloud storage.

Type: Int32[]
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Id

Cloud storage Id that is registered in Recovery Manager for Active Directory.

Type: Int32[]
Parameter Sets: Id
Aliases: StorageId

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByPropertyName, ByValue)
Accept wildcard characters: False

-IgnoreReadOnly

Allows you to perform the action in a console currently performing full replication (for internal use only).

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Specifies the CloudStorage object representing the storage you want to update.

Type: CloudStorage[]
Parameter Sets: InputObject
Aliases:

Required: True
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

INPUTS

System.Int32[]

QuestSoftware.RecoveryManager.AD.FE.PowerShell.CloudStorage[]

OUTPUTS

System.Object

NOTES

RELATED LINKS

 

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation