Tchater maintenant avec le support
Tchattez avec un ingénieur du support

QoreStor 7.1.3 - Installation Guide

Licensing QoreStor

QoreStor offers a backend capacity licensing model to allow for simple integration with other Quest Data Protection products.

  • Standalone license - QoreStor is licensed by the amount of backend capacity required. Standalone licenses are available as either perpetual licenses (with no expiration), or term licenses, which expire after a specified period of time.

    NOTE: Term licenses are intended for specific customer use cases, i.e., licensing according to yearly billing cycles. A perpetual license is appropriate for most customers.

QoreStor licenses are additive, meaning that if you purchase a 5 TB license now, and a 10 TB license in the future, you will have 15 TB total capacity.

NOTE: Licenses for QoreStor are specific to the QoreStor server. When installing a license, the System ID for your QoreStor server is required. You can obtain the System ID with the command system --show | grep "System ID"

Evaluating QoreStor

QoreStor offers two methods for evaluation:

  • Default installation - If no license is installed, QoreStor defaults to a no-cost, 1 TB capacity installation supported by the QoreStor Community. This option requires no license and does not expire. If a license is applied to a server running in this mode, the free 1 TB is not added to the purchased license capacity.
  • Full capacity trial - available on the Quest Software Trial site, which provides a 30-day evaluation license for up to 360 TB and access to Quest Support. After the evaluation period has expired, the QoreStor server will operate in Manual Intervention mode until a license is applied. To use QoreStor beyond that time frame, you will need to purchase a perpetual standalone license. If a longer trial period is required, please contact Quest Sales.

If you have purchased a standalone license, you can install it using the system --license command, as described in the QoreStor Command Line Reference Guide.

NOTE: When ordering a license, the System ID for your QoreStor server is required. You can obtain the System ID with the command system --show | grep "System ID"

Installing a license

You can add a license to QoreStor through either the QoreStor GUI or the command line interface.

To install a license

  1. In the navigation menu, click System.
  2. Scroll to the License Information section at the bottom of the page.
  3. Click Upload License.
  4. Click Choose File and select the license file. Click Open.
  5. Click Apply.

NOTE: You may also install a QoreStor license from the command line interface using the command:

system --license [--show] [--verbose] [--validate] [--file <path>] [--add] [--file <path>]

Refer to the QoreStor Command Line Reference Guide for more information.

QoreStor installation modes

QoreStor can be installed in one several installation modes, each with different hardware requirements and expected performance levels. When QoreStor is installed in Object Direct mode, the installation modes available are slightly different and support different capacities.

Installation modes for standard QoreStor installations

  • Large - This is the mode of installation that will yield the highest capacity and performance. Large mode supports a back-end capacity of up to 360 TB. It also requires that the data and metadata volumes are on separate RAID sets.
  • Standard - This is the mode of installation that will suit most environments as it supports a backend capacity of up to 150 TB.
  • Cloud Optimized - This is a smaller footprint installation designed to maximize cost-effectiveness for operation in cloud environments. The data dictionary size is reduced to reflect the lower backend capacity limit of 43 TB.

NOTE: When QoreStor is installed in Cloud Optimized, Archive tier is not supported.

NOTE: For information on available virtual machine configurations, see "QoreStor VM Specifications" in the QoreStor Interoperability Guide.

Installation modes for installing QoreStor in Object Direct Configuration

  • Large - This is the mode of installation that will yield the highest capacity and performance. Large mode supports a back-end capacity of up to 360 TB. Additionally, 18 TB of SSD storage must be configured for QoreStor metadata.
  • Standard - This is the mode of installation that will suit most environments as it supports a back end capacity of up to 150 TB. Additionally, 8 TB of SSD storage must be configured for QoreStor metadata.
  • Cloud Optimized - This is a smaller footprint installation designed to maximize cost-effectiveness for operation in cloud environments. The data dictionary size is reduced to reflect the lower backend capacity limit of 43 TB. Additionally, 2 TB of additional storage must be configured for QoreStor metadata.

 

NOTE: When QoreStor is installed in Cloud Optimized mode, Archive tier is not supported.

NOTE: When QoreStor is installed in an Object Direct configuration, VTL containers are not supported.

NOTE: When QoreStor is installed in an Object Direct configuration, the minimum required swap space is 16 GB.

NOTE: When QoreStor is installed in an Object Direct configuration, seed import operation is not supported.

System requirements

Installation requirements and platform support information is updated continually in the QoreStor Interoperability Guide. Please refer to that document for up-to-date information.

Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation