external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Performs the restore operation for the RMADFE project.
Start-RMADFERecovery [-Force] [-NotifyByEmail <Boolean>] [-GroupPasswords <Hashtable>] [-WhatIf] [-Confirm]
[<CommonParameters>]
This cmdlet starts the restore operation on the current RMADFE project.
PS C:\> Start-RMADFERecovery
This command performs the restore operation on the current RMADFE project.
$pwd1 = ConvertTo-SecureString "new password 1" -AsPlainText -Force
$pwd2 = ConvertTo-SecureString "new password 2" -AsPlainText -Force
$pwd3 = ConvertTo-SecureString "new password 3" -AsPlainText -Force
$passwords = @{ "Enterprise Admins"=$pwd1; "Domain Admins"=$pwd2; "Administrators"=$pwd3 }
Start-RMADFERecovery -GroupPasswords $passwords
This command performs the restore operation and resets the password for domain users in the following privileged groups: Enterprise Admins, Domain Admins, and Administrators.
Overrides restrictions that prevent the command from succeeding, apart from security settings.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Resets a password for domain users in specified privileged groups.
The new password can be only used once, users must change their password after logging in with the new password.
Use the Set-RMADFEDomain cmdlet to enable the password resetting before you reset the password with this parameter.
The password resetting option is available only for Forest Recovery and Domain Recovery modes.
Type: Hashtable
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows notification about the recovery result by email.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Prompts for confirmation before running the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
Describes what would happen if you ran the command without actually running the command.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Starts so-called agent operation on the remote machine where Forest Recovery agent is installed.
Start-RMADFERecoveryAgentOperation [[-ComputerName] <String>] -Parameters <OperationParameters>
[-AgentPort <UInt32>] [<CommonParameters>]
Start-RMADFERecoveryAgentOperation [-ComputerName] <String> [-DcCredential <PSCredential>]
-Parameters <OperationParameters> [-AgentPort <UInt32>] [<CommonParameters>]
Start-RMADFERecoveryAgentOperation [-ComputerName] <String> [-DsrmCredential <PSCredential>]
-Parameters <OperationParameters> [-AgentPort <UInt32>] [<CommonParameters>]
Start-RMADFERecoveryAgentOperation [-ComputerName] <String> [-DcCredential <PSCredential>]
[-DsrmCredential <PSCredential>] -Parameters <OperationParameters> [-AgentPort <UInt32>] [<CommonParameters>]
Starts so-called agent operation on the remote machine where Forest Recovery agent is installed.
Operation type and parameters are defined in the Parameters parameter.
PS C:\> {{ Add example code here }}
{{ Add example description here }}
{{ Fill AgentPort Description }}
Type: UInt32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Target machine name or IP address.
Type: String
Parameter Sets: ProjectSpecificParameters
Aliases:
Required: False
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Type: String
Parameter Sets: ProjectLessNormalMode, ProjectLessDsrm, ProjectLessBothMode
Aliases:
Required: True
Position: 0
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credentials used to access DC when DC booted in normal mode.
Not used in most cases when Schannel authentication is used between agent and console.
Type: PSCredential
Parameter Sets: ProjectLessNormalMode, ProjectLessBothMode
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Credentials used to access DC when DC booted in the DSRM.
Not used in most cases when Schannel authentication is used between agent and console.
Type: PSCredential
Parameter Sets: ProjectLessDsrm, ProjectLessBothMode
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
An OperationParameters object specifies operation type and parameters.
Type: OperationParameters
Parameter Sets: (All)
Aliases:
Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShellFE.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShellFE
online version:
Performs verification of the RMADFE project.
Start-RMADFEVerification [-ComputerName <String[]>] [-NotifyByEmail <Boolean>] [<CommonParameters>]
This cmdlet collects and saves information that is used for recovery from all domain controllers in the recovery project.
Then, it checks the project recovery settings against the collected information to provide you information about any inconsistencies.
Start a new project session by calling the Start-RMADFEProjectSession cmdlet first.
Use the Get-RMADFEProjectSummary cmdlet to track the progress of the project session.
PS C:\> Start-RMADFEVerification
This command performs verification of the current RMADFE project.
Specifies the fully qualified domain name of the computer.
Type: String[]
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
Allows notification about the recovery result by email.
Type: Boolean
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
external help file: QuestSoftware.RecoveryManager.AD.PowerShell.dll-Help.xml
Module Name: Quest.RecoveryManager.AD.PowerShell
online version:
{{ Fill in the Synopsis }}
Start-RMADHybridRecoveryDiscovery [-IgnoreReadOnly] [<CommonParameters>]
{{ Fill in the Description }}
PS C:\> {{ Add example code here }}
{{ Add example description here }}
{{ Fill IgnoreReadOnly Description }}
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
© ALL RIGHTS RESERVED. Conditions d’utilisation Confidentialité Cookie Preference Center