The Foglight Cartridge for SAP ASE release package contains the following:
SAP ASE cartridges former to 5.7.5.40 cannot be upgraded to the current SAP ASE cartridge version (5.9.3.10).
Workaround: You may install the new SAP ASE cartridge on the same FMS instance as the old cartridge. The new SAP ASE cartridge must use a different FglAM than the legacy cartridge, as well as new SAP ASE user account.
To maintain cartridge history, do not remove the legacy cartridge: From the same reasons as mentioned above, the history in the legacy cartridge is not accessible from the new cartridge. Also, as mentioned in the Workaround above, both legacy and new SAP ASE cartridges can be installed side by side. Hence legacy History will be available via the legacy cartridge.
Same Sybase instance can be monitored by both Legacy Sybase agent and new Sybase agent (5.9.3.10), if unique FglAM and unique Sybase user account is used for each account.
SAP ASE cartridge 5.9.3.10 does not require Sybase Open Client to be installed.
After installing the cartridge, update the SAP ASE account for Foglight by manually downloading and running the scripts "DB_Sybase_FirstRun_Scripts" located under Foglight > Dashboards > Administration > Agents > Cartridges > Components for Download .
isql -Usa -Ppassword -SserverName -i rapsAdmin.sql -o rapsAdmin.out
2017-08-13 17:15:31.336 INFO [FglAM:IncomingMessage[5]-111] com.quest.glue.core.agent.AgentInstance - Created agent
2017-08-13 17:15:31.336 VERBOSE [FglAM:IncomingMessage[5]-111] com.quest.glue.core.agent.AgentInstance - Starting data collection
2017-08-13 17:15:31.336 INFO [FglAM:IncomingMessage[5]-111] com.quest.qsi.fason.core.agent.AbstractAgent - Sybase 16 new2 entering startDataCollection()
2017-08-13 17:15:31.337 INFO [FglAM:IncomingMessage[5]-111] com.quest.foglight.sybase.common.connection.SybaseConnectionPool - Successfully loaded Sybase driver com.sybase.jdbc4.jdbc.SybDriver
2017-08-13 17:15:31.338 INFO [FglAM:IncomingMessage[5]-111] com.quest.glue.core.agent.AgentInstance - Started data collection
2017-08-13 17:15:31.391 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.common.agent.SybaseCollectionsSharedData - DB connect availability was changed from null to true
2017-08-13 17:15:31.427 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.SybaseVersionInfoProcessor - Set DB version to 16.0
2017-08-13 17:15:31.427 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.SybaseVersionInfoProcessor - Set EBF to 22385
2017-08-13 17:15:31.428 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.SybaseVersionInfoProcessor - Set cluster to false
2017-08-13 17:15:31.428 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.SybaseVersionInfoProcessor - Full version - Adaptive Server Enterprise/16.0/EBF 22385 SMP/P/X64/Windows Server/asecepheus/3530/64-bit/FBO/Sun Feb 16 06:52:50 2014
2017-08-13 17:15:31.441 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.GetVersionProcessor - DB Version 16000000
2017-08-13 17:15:31.460 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.SybaseQuestDBInfoProcessor - Use quest DB true
2017-08-13 17:15:31.516 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.StoreProceduresVersionInfoProcessor - The agent stored procedures detected in the monitored DB belong to version= 5.7.5.92.
2017-08-13 17:15:31.545 INFO [Sybase 16 new2-highPriorityPool-1] com.quest.foglight.sybase.mda.collection.processor.startup.InitServerIsLocalProcessor - Set local server to false
2017-08-02 13:45:45.871 ERROR [FRT21_1503_42-lowPriorityPool-3-[SybaseServerStatus][2017/08/02 13:45:43]] com.quest.foglight.sybase.mda.collection.processor.startup.InstallSpProcessor - Error while running SP script
if exists (select 1
from sysobjects
where sysstat & 7 = 4 and uid = user_id()
and name = 'sp_fgl_version')
begin
After installing the Cartridge for SAP ASE, perform the configuration steps below:
To create a new SAP ASE user:
exec sp_addlogin 'username' , 'password' , sybsystemprocs
exec sp_fgl_adduser 'username' , 'foglightGroup'
The first pre-requisite is that the Sybase_MDA feature be installed on the respective ASE. This feature is not automatically installed on all versions of Sybase ASE. A check the DBA can run is the query: “select * from master..monState”.
If the monitoring tables are not installed in your Adaptive Server (12.5.1 or later), have the Sybase DBA for the respective ASE follow the steps to install the tables listed in the Addendum at the end of this section.
For versions 15.x, there is no need for loopback and installmontables.
The Sybase_MDA feature has numerous parameters to both turn on and turn off specific metrics and determine the amount of memory the ASE will set aside for these metrics.
Performance monitoring how has the ability to enable the user to set the per_object_statistics flag to off.
Callback collections require communication between the Foglight Management Server and the Sybase server. Ensure that the port used by the Sybase host server is open between the Sybase host and the Foglight Management Server.
The Sybase login defined in the Foglight agent property for the respective agent must have the “mon_role” assigned. This is also applicable to the ‘sa’ login.
Command to execute via ISQL or other client tool:
grant role mon_roleto_<logon_name>
The Sybase_RS agent requires separate common logins to be created for the Replication Server, the RSSD data server, the Primary data server, and the Replicate data server.
Note: Refer to the Sybase_RS "Setting Connection Details" topic in the Managing Sybase Database Systems online help for more information.
If the monitoring tables are not installed in your Adaptive Server (12.5.1 or subsequent release), have the Sybase DBA for the respective ASE follow these steps to install the tables.
First, a server named “loopback” must be included in sysservers before installing the scripts for the MDA tables. Proxy tables for the monitoring tables are not created by default when you configure Adaptive Server. The tables are created in the second step using the installmontables script that is included in the Adaptive Server install (located in the $SYBASE/ASE-12_5/scripts directory).
sp_addserver 'loopback', null, <ASE server name> go
isql –Usa –P<sa password> -S<server name> -n –i%SYBASE%/%SYBASE_ASE%/scripts/installmontables
Sybase_MDA agent requires the following configuration for it to run correctly and gather the specified data for the Foglight Management Server.
The values shown for the following parameters are the minimum required values that the Foglight Cartridge for SAP ASE 5.9.3.10 needs for proper data collection and reporting. Any of these parameter values could be increased if necessary. (You can copy, paste, and execute the following script into an ISQL or other client session.)
sp_configure "statement cache size" <size_of_cache> go sp_configure "errorlog pipe max messages",1000 go sp_configure "max SQL text monitored",256 go sp_configure "sql text pipe max messages",3000 go sp_configure "statement pipe max messages",3000 go -- Flags sp_configure "enable stmt cache monitoring" , 1 go sp_configure "enable literal autoparam" [0|1] go sp_configure "enable monitoring", 1 go sp_configure "sql text pipe active", 1 go sp_configure "errorlog pipe active", 1 go sp_configure "per object statistics active",1 go sp_configure "statement statistics active",1 go sp_configure "statement pipe active",1 go sp_configure "wait event timing",1 go sp_configure "SQL batch capture",1 go sp_configure "process wait events",1 go
The following tables list proprietary Sybase flags and the Sybase_MDA agent tables dependent upon them. If any of the settings do not have values that fall in the recommended value range, data collection will issue complaints and fail to successfully collect; indicating that some MDA table collection was canceled as a result of the flags being set incorrectly. To prevent these alerts from occurring, use the appropriate Data Management properties to disable the collection that is failing to collect. Below is a listing of Sybase_MDA agent tables and the configuration settings they depend on:
|
Foglight Table |
Sybase MonTable (MDA) Configuration Settings |
|
TopHash |
enable stmt cache monitoring = 1 statement cache size = size_of_cache enable literal autoparam = 0 or 1 Note: Setting enable literal autoparam to 0 causes Sybase to treat each SQL statement separately; setting it to 1 produces bind variables for each search argument in an SQL statement. |
|
TopSQL |
enable monitoring = 1 |
|
UsersBlocked |
enable monitoring = 1 |
|
UsersLogCache |
enable monitoring = 1 |
|
TopApplications |
enable monitoring = 1 |
|
Index |
enable monitoring = 1 |
|
TopUsers |
enable monitoring = 1 |
Additional information is available from the following:
This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.
This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe.
This release has the following known capabilities or limitations: The server will be enabled for Global Operation, but not localized to any particular locale.
We are on a quest to make your information technology work harder for you. That is why we build community-driven software solutions that help you spend less time on IT administration and more time on business innovation. We help you modernize your data center, get you to the cloud quicker and provide the expertise, security and accessibility you need to grow your data-driven business. Combined with Quest’s invitation to the global community to be a part of its innovation, and our firm commitment to ensuring customer satisfaction, we continue to deliver solutions that have a real impact on our customers today and leave a legacy we are proud of. We are challenging the status quo by transforming into a new software company. And as your partner, we work tirelessly to make sure your information technology is designed for you and by you. This is our mission, and we are in this together. Welcome to a new Quest. You are invited to Join the Innovation™.
Our logo reflects our story: innovation, community and support. An important part of this story begins with the letter Q. It is a perfect circle, representing our commitment to technological precision and strength. The space in the Q itself symbolizes our need to add the missing piece — you — to the community, to the new Quest.
For sales or other inquiries, visit https://www.quest.com/company/contact-us.aspx/.
Technical support is available to Quest customers with a valid maintenance contract and customers who have trial versions. You can access the Quest Support Portal at https://support.quest.com.
The Support Portal provides self-help tools you can use to solve problems quickly and independently, 24 hours a day, 365 days a year. The Support Portal enables you to:
Quest, the Quest logo, Foglight, and Join the Innovation are trademarks and registered trademarks of Quest Software Inc. in the U.S.A. and other countries. For a complete list of Quest Software trademarks, please visit our website at www.quest.com/legal. Red Hat, JBoss, the JBoss logo, and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the U.S. and other countries. CentOS is a trademark of Red Hat, Inc. in the U.S. and other countries. Fedora and the Infinity design logo are trademarks of Red Hat, Inc. Microsoft, .NET, Active Directory, Internet Explorer, Hyper-V, Office 365, SharePoint, Silverlight,SQL Server, Visual Basic, Windows, Windows Vista and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. AIX, IBM, PowerPC, PowerVM, and WebSphere are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide. Java, Oracle, Oracle Solaris, PeopleSoft, Siebel, Sun, WebLogic, and ZFS are trademarks or registered trademarks of Oracle and/or its affiliates in the United States and other countries. SPARC is a registered trademark of SPARC International, Inc. in the United States and other countries. Products bearing the SPARC trademarks are based on an architecture developed by Oracle Corporation. OpenLDAP is a registered trademark of the OpenLDAP Foundation. HP is a registered trademark that belongs to HewlettPackard Development Company, L.P. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. MySQL is a registered trademark of MySQL AB in the United States, the European Union and other countries. Novell and eDirectory are registered trademarks of Novell, Inc., in the United States and other countries. VMware, ESX, ESXi, vSphere, vCenter, vMotion, and vCloud Director are registered trademarks or trademarks of VMware, Inc. in the United States and/or other jurisdictions. Sybase is a registered trademark of Sybase, Inc. The X Window System and UNIX are registered trademarks of The Open Group. Mozilla and Firefox are registered trademarks of the Mozilla Foundation. IOS is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. Apple, iPad, iPhone, Mac OS, Safari, Swift, and Xcode are trademarks of Apple Inc., registered in the U.S. and other countries. Ubuntu is a registered trademark of Canonical Ltd. Symantec and Veritas are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. OpenSUSE, SUSE, and YAST are registered trademarks of SUSE LCC in the United States and other countries. Citrix, AppFlow, NetScaler, XenApp, and XenDesktop are trademarks of Citrix Systems, Inc. and/or one or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries. PostgreSQL is a registered trademark of the PostgreSQL Global Development Group. MariaDB is a trademark or registered trademark of MariaDB Corporation Ab in the European Union and United States of America and/or other countries. Intel, Itanium, Pentium, and Xeon are trademarks of Intel Corporation in the U.S. and/or other countries. Debian is a registered trademark of Software in the Public Interest, Inc. OpenStack is a trademark of the OpenStack Foundation. Amazon Web Services, the "Powered by Amazon Web Services" logo, and "Amazon RDS" are trademarks of Amazon.com, Inc. or its affiliates in the United States and/or other countries. Infobright, Infobright Community Edition and Infobright Enterprise Edition are trademarks of Infobright Inc. POLYCOM®, RealPresence® Collaboration Server, and RMX® are registered trademarks of Polycom, Inc. All other marks and names mentioned herein may be trademarks of their respective companies.
© 2024 Quest Software Inc. ALL RIGHTS RESERVED. Conditions d’utilisation Confidentialité Cookie Preference Center
