SharePlex 9.2.6 - Installation and Setup for Oracle Source

Install SharePlex on Linux/UNIX for Oracle Database

Read this before you begin:

• These instructions assume that you understand and satisfied all requirements in the SharePlex preinstallation checklist.
• Perform the installation steps on all Unix and Linux machines involved in SharePlex replication. In a cluster, install on the primary node, which is the one to which the shared disk is mounted.
• These instructions assume installation as non-root. To install as root, see Install SharePlex as Root.
• The SharePlex security groups and SharePlex Administrator must exist on the system prior to installation. See Installer checklist for more information.

• You can run the installer in either of the following ways:

  Run the installer in interactive mode

  Run the installer in unattended mode

Run the installer in interactive mode

In interactive mode, you are prompted for each part of the installation information.

1. Log in to the system as the user that will be named as the SharePlex Administrator during this installation. This user will own the installation files and binaries.

2. If sp_cop is running, shut it down.

   sp_ctrl> shutdown

3. Copy the installation file to a temporary directory where you have write permissions.

4. Grant executable permissions to the file.

   #chmod 555installation_file

5. Run the .tpm file. If installing SharePlex in a cluster, run the installer from the primary node (the one to which the shared disk is mounted)

   # ./installation_file

6. Verify that the information shown on the first screen corresponds to the Oracle version and platform you are upgrading.

7. You are prompted for the following:

   Prompt	Input
   Installation type	Select <New Installation>.
   Product directory location (path)	Enter the path to the SharePlex installation directory. If the specified directory does not exist, the installer creates it. If the directory exists, it must be empty. The installer quits if the directory contains prior SharePlex installations or other files. In a cluster, install on the shared disk. For more information, see Installation and setup for Oracle cluster.
   Variable data directory location	Specify an empty directory. The installer creates the specified directory if it does not exist. Important! Do not install this directory into the SharePlex product directory. In a cluster, install the variable-data directory on the shared disk. For more information, see Installation and setup for Oracle cluster.
   SharePlex Admin group	Enter the DBA-privileged group to which the SharePlex Administrator user belongs, which will own the SharePlex binaries. If the default group of the SharePlex Administrator is oinstall, select any option, and make certain this user is listed under oinstall in the etc/group file. For more information, see Installer checklist.
   TCP/IP port for SharePlex	Enter the port number to use for SharePlex TCP/IP communications.
   License key (do you have?)	Press Enter to accept the default of Y (yes). If you do not have a license, enter no. For licensing on a cluster, see Installation and setup for Oracle cluster At any point before you run SharePlex you can add the license key with the splex_add_key utility. For more information, see SharePlex license utilities.
   License key	Enter the license key you received from Quest.
   Customer name	Enter the SiteMessage text string provided by Quest with the license key.

The installer displays the location of the install log file and then quits.

See Next steps.

Next steps

Install SharePlex on Linux for Open Target Databases

Read this before you begin:

• These instructions assume that you understand and satisfied all preinstallation requirements that apply to your environment. See the SharePlex preinstallation checklist.
• For preinstallation information about installing SharePlex for target databases hosted on Amazon cloud services, see Installation and setup for cloud-hosted databases
• These instructions assume installation as non-root. To install as root, see Install SharePlex as Root.
• The SharePlex security groups and SharePlex Administrator must exist on the system prior to installation. See Installer checklist for more information.

• You can run the installer in either of the following ways:

  Run the installer in interactive mode

  Run the installer in unattended mode

Run the installer in interactive mode

In interactive mode, you are prompted for each part of the installation information.

1. Log in to the system as the user that will be named as the SharePlex Administrator during this installation. This user will own the installation files and binaries.

2. (Reinstallations) If sp_cop is running, shut it down.
3. Copy the installation file to a temporary directory where you have write permissions.

4. Grant executable permissions to the file.

   # chmod 555 installation_file

5. Run the .tpm file. If installing SharePlex in a cluster, run the installer from the primary node (the one to which the shared disk is mounted)

   # ./installation_file

6. You are prompted for the following:

   Prompt for:	Input
   Installation type	Select <New Installation>.
   Product directory location (path)	Enter the path to the SharePlex installation directory. If the specified directory does not exist, the installer creates it. If the directory exists, it must be empty. The installer quits if the directory contains prior SharePlex installations or other files.
   Variable data directory location	Specify an empty directory. The installer creates the specified directory if it does not exist. Important! Do not install this directory into the SharePlex product directory.
   SharePlex Admin group	Enter the DBA-privileged group to which the SharePlex Administrator user belongs, which will own the SharePlex binaries. If the default group of the SharePlex Administrator is oinstall, select any option, and make certain this user is listed under oinstall in the etc/group file. For more information, see Installer checklist.
   TCP/IP port for SharePlex	Enter the port number to use for SharePlex TCP/IP communications.
   License key (do you have?)	Press Enter to accept the default of Y (yes). If you do not have a license, enter no. At any point before you run SharePlex you can add the license key with the splex_add_key utility. For more information, see SharePlex license utilities.
   License key	Enter the license key you received from Quest.
   Customer name	Enter the SiteMessage text string provided by Quest with the license key.

The installer displays the location of the install log file and then quits.

See Next steps.

Next steps

Install SharePlex on Windows

Contents

Install SharePlex on Windows

Read this before you begin:

• These instructions assume that you understand and satisfied all requirements in the SharePlex SharePlex preinstallation checklist.
• Perform the installation steps on all Windows machines involved in SharePlex replication. On Windows, install SharePlex on all nodes of each cluster, on the same port number, with identical path names. This is required to make the binaries and the required MKS Toolkit components available to all nodes, and to establish Registry entries.

To run the installer

1. Log in to Windows as the SharePlex Administrator.

2. (Reinstallation only)

   1. Run SpUtils from the shortcut on the Windows desktop. If the system is running Windows 2008 or higher, run SpUtils as an Administrator.
   2. Select the SharePlex Services tab.
   3. Select the correct port, and then stop the SharePlex service.
   4. Close the utility.

3. Run the sp_setup installation program and follow the prompts:

   Prompt	Input
   Destination folder	SharePlex installation directory (known as the product directory). Specify an empty existing directory or a new one to be created.
   Port number	The port number on which this instance of SharePlex will run. The default is 2100. Do not use port 2101. That port is reserved for the SpRemote utility.
   Variable Data directory	The directory where SharePlex stores its working files and data. Specify an empty existing directory or a new one to be created. To avoid permissions errors during runtime, do not install the variable-data directory in the Program Files directory.
   Program Manager group	The folder in the Programs menu where SharePlex programs will be launched.
   MKS Platform Components	Appears if SharePlex was never installed on the system or if this is a reinstallation. Accept the default Program Files location or specify a different one. If prompted to restart your system, you can postpone the restart until after you finish this installation.
   Confirm installation	Confirm the installation information.
   SharePlex license	Click Add License. Type or paste the following exactly as received from Quest Software, including any spaces: License Key: The license key, which is case sensitive. Customer Name: The Site Message text that was included with the license. The name is case-sensitive. Click OK. If you do not have a license, click Cancel. The installation succeeds without a license, but SharePlex cannot be started. You can add the license later from the License Key tab of the SpUtils utility, which is installed on the Windows desktop.
   Finish	If you were prompted to restart the system after you installed the MKS Toolkit files, you may do so after exiting the installer. Proceed to Next Steps.

Next steps:

The following setup tasks must be finished before you start up replication.