Tchater maintenant avec le support
Tchattez avec un ingénieur du support

Rapid Recovery 6.7 - Commands and Scripting Reference Guide

Introduction to Rapid Recovery Command Line Management utility PowerShell module
Prerequisites for using PowerShell Working with commands and cmdlets Rapid Recovery PowerShell module cmdlets
Add-EsxAutoProtectObjects Add-EsxVirtualMachines Add-HyperVClusterSharedVirtualDisks Add-HyperVClusterVirtualMachines Add-HyperVVirtualMachines Disable-HyperVAutoProtection Edit-AzureVirtualStandby Edit-EsxiVirtualStandby Edit-HyperVVirtualStandby Edit-OracleDBVerifyNightlyJob Edit-OracleLogTruncationNightlyJob Edit-Replication Edit-ScheduledArchive Edit-VBVirtualStandby Edit-VMVirtualStandby Enable-HyperVAutoProtection Enable-OracleArchiveLogMode Get-ActiveJobs Get-CloudAccounts Get-Clusters Get-CompletedJobs Get-ExchangeMailStores Get-Failed Get-FailedJobs Get-HyperVClusterSharedVirtualDisks Get-ListAzureVMSizes Get-Mounts Get-OracleInstances Get-Passed Get-ProtectedServers Get-ProtectionGroups Get-QueuedJobs Get-RecoveryPoints Get-ReplicatedServers Get-Repositories Get-ScheduledArchives Get-SqlDatabases Get-TransferQueueEntries Get-UnprotectedVolumes Get-Version Get-VirtualizedServers Get-Volumes New-AzureVirtualStandby New-Base New-BootCD New-CloudAccount New-EncryptionKey New-EsxiVirtualStandby New-FileSearch New-HyperVVirtualStandby New-Mount New-Replication New-Repository New-ScheduledArchive New-Snapshot New-VBVirtualStandby New-VMVirtualStandby Push-Replication Push-Rollup Remove-Agent Remove-EsxAutoProtectObjects Remove-HyperVClusterSharedVirtualDisks Remove-HyperVClusterVirtualMachines Remove-HyperVVirtualMachines Remove-Mount Remove-Mounts Remove-RecoveryPoints Remove-RemoteMount Remove-RemoteMounts Remove-Replication Remove-Repository Remove-ScheduledArchive Remove-VirtualStandby Restart-CoreService Resume-Replication Resume-ScheduledArchive Resume-Snapshot Resume-VirtualStandby Set-AgentMetadataCredentials Set-DedupCacheConfiguration Set-License Set-OracleMetadataCredentials Set-ReplicationResponse Start-Archive Start-AttachabilityCheck Start-AzureDeploy Start-AzureExport Start-ChecksumCheck Start-ConsumeSeedDrive Start-CopySeedDrive Start-EsxiExport Start-HypervExport Start-LogTruncation Start-MountabilityCheck Start-OptimizationJob Start-OracleDBVerifyJob Start-OracleLogTruncationJob Start-Protect Start-ProtectCluster Start-ProtectEsxServer Start-ProtectHyperVCluster Start-ProtectHyperVServer Start-RepositoryCheck Start-RestoreAgent Start-RestoreArchive Start-ScheduledArchive Start-VBExport Start-VirtualStandby Start-VMExport Stop-ActiveJobs Stop-CoreService Suspend-Replication Suspend-ScheduledArchive Suspend-Scheduler Suspend-Snapshot Suspend-VirtualStandby Suspend-VMExport Update-Repository
Localization Qualifiers
Scripting

New-Snapshot

The New-Snapshot command forces a snapshot resulting in a data transfer for the current protected machine. When you force a snapshot, the transfer will start immediately or will be added to the queue. Only the data that has changed from a previous recovery point will be transferred. If there is no previous recovery point, all data on the protected volumes will be transferred.

Usage

The usage for the command is as follows:

New-Snapshot [-all] | -protectedserver [machine name]] -core [host name] -user [user name] -password [password]

Command Options

The following table describes the options available for the New-Snapshot command:

Table 131: New-Snapshot command options
Option Description
-?
Display this help message.
-all
Force all protected machines.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-protectedserver
Force for the current protected machine’s name.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.

Example:

Force a snapshot for all protected machines:

>New-Snapshot -all

New-VBVirtualStandby

The New-VBVirtualStandby command lets you use PowerShell to create a new virtual export to a VirtualBox virtual machine (VM).

Usage

The usage for the command is as follows:

New-VBVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -volumes [volumes names] -vmname [virtual machine name] [-ram [total megabytes] | -usesourceram]  -linuxhostname [linux hostname] -hostport [linux port] -targetpath [location] -pathusername [login] -pathpassword [password] -initialexport

Command Options

The following table describes the options available for the New-VBVirtualStandby command:

Table 132: New-VBVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
Show jobs for a specific protected machine, indicated by IP address.
-volumes
Optional. List the volume names you want to export. If not specified, all volumes in the recovery point(s) are exported. Values must be enclosed in double quotes and separated by space; for example, "c:", "d:".
Note: Do not use trailing slashes in volume names.
-vmname
The Microsoft Windows name of the virtual machine.
-ram
Allocate a specific amount of RAM on the virtual server.
-usesourceram
Optional. Allocate the same amount of RAM on the virtual server that the source protected machine has.
-linuxhostname
The Linux VirtualBox server host name.
-hostport
The Linux VirtualBox server port.
-targetpath
The local, network, or Linux path to the folder where you want to store the virtual machine files.
-pathusername
The user name for logging in to the network machine. It is only required when you specify a network location for the target path.
-pathpassword
The password for logging in to the network machine. It is only required when you specify a network location for the target path.
-accountusername
Optional. You can specify a user account with which to register the exported virtual machine. It is the user name for logging in to the user account. Use this option for a local or network machine only.
-accountpassword
Optional. You can specify a user account with which to register the exported virtual machine. It is the password for logging in to the user account. Use this option for a local or network machine only.
-initialexport
Optional. Specify this option if you need to start an initial on-demand virtual machine export after configuring the virtual standby.

Example:

Create a VirtualBox virtual standby machine named ExportedMachine1 in a specified location:

Pending example from QA.

>New-VBVirtualStandby -protectedserver 10.10.10.4 -volumes C:\ -vmname ExportedMachine1 -usesourceram -targetpath I:\VMExport

New-VMVirtualStandby

The New-VMVirtualStandby PowerShell command lets you create a new VMware Workstation virtual standby machine using Rapid Recovery.

Usage

The usage for the command is as follows:

New-VMVirtualStandby -core [host name] -user [login] -password [password] -protectedserver [name | IP address] -volumes [volumes names] -vmname [virtual machine name] [-ram [total megabytes] | -usesourceram] -targetpath [location] -pathusername [login] -pathpassword [password] -initialexport

Command Options

The following table describes the options available for the New-VMVirtualStandby command:

Table 133: New-VMVirtualStandby command options
Option Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-user
Optional. User name for the remote Core host machine. If you specify a user name, you also have to provide a password.

If none are provided, then the logged-on user's credentials will be used.

-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a log on.

If none are provided, then the logged-on user's credentials will be used.

-protectedserver
Show jobs for a specific protected machine, indicated by IP address.
-volumes
Optional. List the volume names you want to export. If not specified, all volumes in the recovery point(s) are exported. Values must be enclosed in double quotes and separated by space; for example, "c:", "d:".
Note: Do not use trailing slashes in volume names.
-vmname
The Microsoft Windows name of the virtual machine.
-ram
Allocate a specific amount of RAM on the virtual server.
-usesourceram
Optional. Allocate the same amount of RAM on the virtual server that the source protected machine has.
-pathusername
The user name for logging in to the network machine. It is only required when you specify a network location for the target path.
-pathpassword
The password for logging in to the network machine. It is only required when you specify a network location for the target path.
-initialexport
Optional. Specify this option if you need to start an initial on-demand virtual machine export after configuring the virtual standby.

Example:

Create a new VMware Workstation virtual standby:

>New-VMVirtualStandby -protectedserver 10.10.10.4 -volumes C:\ -vmname ExportedMachine1 -usesourceram -targetpath I:\VMExport

Script pauses, requiring user to specify an index number for the appropriate workstation. Enter the index number for the script to complete (in this case, 2). Example continues:

2
Verify location ...
Virtual Standby successfully configured
PS C:\Users\Administrator>

Push-Replication

The Push-Replication command forces replication for one or more protected machines.

Usage

The usage for the command is as follows:

Push-Replication -core [host name] -user [user name] -password [password] -targetcore [host name] -all | -protectedserver [machine name | IP address]

Command Options

The following table describes the options available for the Push-Replication command:

Table 134: Push-Replication command options
Option Description
-?
Display this help message.
-all
Force replication for all machines being replicated to the target Core.
-core
Optional. Remote Core host machine IP address (with an optional port number). By default the connection is made to the Core installed on the local machine.
-password
Optional. Password to the remote Core host machine. If you specify a password, you also have to provide a user name. If none are provided, then the logged-on user's credentials will be used.
-protectedserver
Protected machine name on the target Core against which to force replication.
-user
Optional. Login for the remote Core host machine. If you specify a login, you also have to provide a password. If none are provided, then the logged-on user's credentials will be used.

Example:

Push replication for a single protected machine:

>Push-Replication -core 10.10.10.10:8006 -user administrator -password 23WE@#$sdd 
-targetcore 10.10.10.20:8006 –protectedserver 10.10.5.22

Push replication for all protected machines:

>Push-Replication -all
Documents connexes

The document was helpful.

Sélectionner une évaluation

I easily found the information I needed.

Sélectionner une évaluation