Rapid Recovery 6.1.3

Table 303. Objects for the AgentProtectionStorageConfiguration parameter
Method	Description
public Guid RepositoryId { get; set; }	Gets or sets the ID of the repository where the agent recovery points are stored.
public string EncryptionKeyId { get; set; }	Gets or sets the ID of the encryption key for this agent's recovery points. An empty string means no encryption.

AgentTransferConfiguration (namespace Replay.Common.Contracts.Transfer)

The following table presents the available objects for the AgentTransferConfiguration parameter.

Table 304. Objects for the AgentTransferConfiguration parameter
Method	Description
public uint MaxConcurrentStreams { get; set; }	Gets or sets the maximum number of concurrent TCP connections the Core establishes to the agent for transferring data.
public uint MaxTransferQueueDepth { get; set; }	Gets or sets the maximum number of block extents which can be queued for writing. When a range of blocks are read from a transfer stream, that range is placed on a producer or consumer queue, where a consumer thread reads it and writes it to the epoch object. If the repository writes slower than the network reads, this queue fills up. The point at which the queue is full and reads stop is the maximum transfer queue depth.
public uint MaxConcurrentWrites { get; set; }	Gets or sets the maximum number of block write operations to have outstanding on an epoch at any given time. If additional blocks are received beyond the maximum number of write operations specified in this parameter, those additional blocks are ignored until one of the outstanding writes finishes.
public ulong MaxSegmentSize { get; set; }	Gets or sets the maximum number of contiguous blocks to transfer in a single request. Depending on testing, higher or lower values may be optimal.
public Priority Priority { get; set; }	Gets or sets the priority for transfer request.
public uint GetChangedBlocksRetries { get; set; }	Gets or sets the count of retries if initial retrieval of changed blocks from the agent failed.
public int MaxRetries { get; set; }	Gets or sets the maximum number of times a failed transfer should be retried before it is presumed failed.
public bool UseDefaultMaxRetries { get; set; }	If included, the default maximum number of retries (specified in transfer configuration) will be used.
public Guid ProviderId{ get; set; }	Gets or sets the GUID of the VSS provider to use for snapshots on this host. Administrators typically accept the default.
public Collection<ExcludedWriter> ExcludedWriterIds { get; set; }	Gets or sets the collection of VSS writer IDs that should be excluded from this snapshot. The writer ID is determined by the name of the writer. This name is for documentation purposes only, and does not necessarily provide an exact match of the writer name.
public ushort TransferDataServerPort { get; set; }	Gets or sets a value containing the TCP port upon which to accept connections from the Core for the actual transfer of data from the protected machine to the Core. The Agent attempts to listen on this port, but if the port is in use, the protected machine can use a different port instead. The Core should use the port number specified in the BlockHashesUri and BlockDataUri properties of the VolumeSnapshotInfo object for each snapped volume.
public TimeSpan CleanSnapshotTimeout { get; set; }	Gets or sets the amount of time to wait for cleaning up the snapshot after transfer is finished.
public TimeSpan SnapshotTimeout { get; set; }	Gets or sets the amount of time to wait for a VSS snapshot operation to complete before giving up and timing out.
public TimeSpan TransferTimeout { get; set; }	Gets or sets the amount of time to wait for further contact from the Core before abandoning the snapshot.
public TimeSpan NetworkReadTimeout { get; set; }	Gets or sets the timeout for network read operations related to this transfer.
public TimeSpan NetworkWriteTimeout { get; set; }	Gets or sets the timeout for network write operations related to this transfer.
public uint InitialQueueSize { get; set; }	Gets or sets a size of initial queue or requests.
public uint MinVolumeFreeSpacePercents { get; set; }	Gets or sets a minimal amount of free space on a volume, measured by percentage. If free space is lower than the amount specified in this parameter, then all change logs are deleted and a base image is forced.
public uint MaxChangeLogsSizePercents { get; set; }	Gets or sets a maximum size of driver change logs as part of volume capacity, measured by percentage. If part of change logs is bigger than this value, then all change logs are deleted and a base image is forced.
public bool EnableVerification { get; set; }	Gets or sets a value indicating whether diagnostic verification of each block sent to Core should be performed.

BackgroundJobRequest (namespace Replay.Core.Contracts.BackgroundJobs)

The following table presents the available objects for the BackgroundJobRequest parameter.

Table 305. Objects for the BackgroundJobRequest parameter
Method	Description
public AgentIdsCollection AgentIds { get; set; }	Gets or sets the IDs of the protected machines.
public bool IsNightlyJob { get; set; }	Gets or sets the value indicating whether the background job is a nightly job.
public Guid NightlyJobTransactionId { get; set; }	Gets or sets the ID of nightly job transaction.
public Guid JobId { get; set; }	Gets or sets the ID of background job.
public bool Force { get; set; }	Gets or sets the value indicating if a job was forced.
public uint JobStartsCount { get; set; }	Gets or sets the number of attempts to start a job.
public virtual bool InvolvesAgentId(Guid agentId)	Determines the value indicating whether the concrete agent is involved in job.

ChecksumCheckJobRequest (namespace Replay.Core.Contracts.Exchange.ChecksumChecks)

Inherits its values from the parameter, DatabaseCheckJobRequestBase.

DatabaseCheckJobRequestBase (namespace Replay.Core.Contracts.Exchange)

Inherits its values from the parameter, BackgroundJobRequest.

Table 306. Objects for the DatabaseCheckJobRequestBase parameter
Method	Description
public string RecoveryPointId { get; set; }	Gets or sets the ID of the recovery point for which databases will be checked.

ExportJobRequest (namespace Replay.Core.Contracts.Export)

Inherits its values from the parameter, BackgroundJobRequest.

The following table presents the available objects for the ExportJobRequest parameter.

Table 307. Objects for the ExportJobRequest parameter
Method	Description
public uint RamInMegabytes { get; set; }	Gets or sets the memory size for the exported VM. Set to zero (0) to use the memory size of the source machine.
public ushort CpuCount { get; set; }	Gets or sets the CPU count for the exported VM. Set to 0 to use the CPU count of the source machine.
public ushort CoresPerCpu { get; set; }	Gets or sets the Cores per CPU count for the exported VM. Set to 0 to use the Cores per CPU count of the source machine.
public VirtualMachineLocation Location { get; set; }	Gets or sets the target location for this export. This is an abstract base class.
public VolumeImageIdsCollection VolumeImageIds { get; private set; }	Gets or sets the volume images to include in the VM export.
public ExportJobPriority Priority { get; set; }	Gets or sets the priority for export request.

NightlyAttachabilityJobRequest (namespace Replay.Core.Contracts.Sql)

Inherits its values from the parameter, BackgroundJobRequest.

Table 308. Objects for the NightlyAttachabilityJobRequest parameter
Method	Description
public int SimultaneousJobsCount { get; set; }	Gets or sets count of jobs that can be run simultaneously.

RollupJobRequest (namespace Replay.Core.Contracts.Rollup)

Inherits its values from the parameter, BackgroundJobRequest.

TakeSnapshotResponse (namespace Replay.Agent.Contracts.Transfer)

The following table presents the available objects for the TakeSnapshotResponse parameter.

Table 309. Objects for the TakeSnapshotResponse parameter
Method	Description
public Guid SnapshotSetId { get; set; }	Gets or sets the GUID assigned by VSS to this snapshot.
public VolumeSnapshotInfoDictionary VolumeSnapshots { get; set; }	Gets or sets the collection of snapshot info for each volume included in the snap.

TransferJobRequest (namespace Replay.Core.Contracts.Transfer)

Inherits its values from the parameter, BackgroundJobRequest.

The following table presents the available objects for the TransferJobRequest parameter.

Table 310. Objects for the TransferJobRequest parameter

Method

Description

public VolumeNameCollection VolumeNames { get; set; }

Gets or sets the collection of names for transfer.

VolumeNames is a data structure that contains the following data:

•

GuidName. The Guid associated with the volume, used as the name if a DisplayName is not set.

•

DisplayName. The displayed name of the volume.

public VolumeNameCollection TransferredVolumes { get; set; }

Gets or sets the collection of transferred volumes.

public VolumeNameCollection DependentVolumeNames { get; set; }

Gets or sets the collection of dependent volumes.

public QuotaSettingsCollection EnabledDiskQuotas { get; set; }

Gets or sets quotas that are enabled on a volume.

public ShadowCopyType ShadowCopyType { get }

Gets the type of copying for transfer. The available values are:

•

Copy

•

Full

public AgentTransferConfiguration TransferConfiguration { get; set; }

Gets or sets the transfer configuration.

AgentTransferConfiguration is an object which will have the following data:

•

MaxConcurrentStreams. The maximum number of concurrent TCP connections the core will establish to the agent for transferring data

•

MaxTransferQueueDepth. The maximum number of block extents which can be queued up for writing

•

MaxConcurrentWrites. The maximum number of block write operations to have outstanding on an epoch at any given time. If additional blocks are received when this many block writes are outstanding, those additional blocks will be ignored until one of the outstanding blocks gets written.

•

MaxSegmentSize. The maximum number of contiguous blocks to transfer in a single request

•

Priority. An object which will have the following data:

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

Highest (which is equal to One)

◦

Lowest (which is equal to Ten)

◦

Default (which is equal to Five)

•

MaxRetries. The maximum number of times a failed transfer should be retried before it is presumed failed

•

UseDefaultMaxRetries. A value indicating that the maximum number of retries is the default value

•

ProviderId. The GUID of the VSS provider to use for snapshots on this host. Users typically use the default setting.

public AgentProtectionStorageConfiguration StorageConfiguration { get; set; }

Gets or sets the storage configuration.

public string Key { get; set; }

Generates a pseudorandom (but not cryptographically secure) key, which can be used as a one-time password to authenticate transfer requests.

public bool IsBaseImage { get; set; }

Gets or sets value indicating whether base image will be taken.

public bool IsForced { get; set; }

Gets or sets value indicating whether transfer has been forced.

public Guid ProtectionGroupId { get; set; }

Gets or sets the ID of the protection group.

public TargetComponentTypes LogTruncationTargets { get; set; }

Gets or sets value that indicates for which databases log truncation will be performed (SQL or Exchange).

public bool ForceBaseImage { get }

Gets the value indicating whether the base image was forced or not.

public bool IsLogTruncation { get }

Gets the value indicating whether the log truncation job is performing or not.

TransferPrescriptParameter (namespace Replay.Common.Contracts.PowerShellExecution)

Inherits its values from the TransferScriptParameterBase parameter.

TransferPostscriptParameter (namespace Replay.Common.Contracts.PowerShellExecution)

The following table presents the available objects for the TransferPostscript parameter. Inherits its value from the TransferScriptParameterBase parameter.

Table 311. Objects for the TransferPostscript parameter

Method

Description

public VolumeNameCollection VolumeNames (get; set; )

Gets or sets the collection of volume names for transfer.

VolumeNames is a data structure that contains the following data:

•

GuidName. The Guid associated with the volume, used as the name if a DisplayName is not set.

•

DisplayName. The displayed name of the volume.

public ShadowCopyType ShadowCopyType { get; set; }

Gets or sets the type of copying for transfer.ShadowCopyType is an enumeration with values. The available values are:

•

Unknown

•

Copy

•

Full

public AgentProtectionStorageConfigurationCommon StorageConfiguration { get; set; }

Gets or sets the storage configuration.

public AgentTransferConfiguration TransferConfiguration { get; set; }

Gets or sets the transfer configuration.

AgentTransferConfiguration is an object which will have the following data:

•

MaxConcurrentStreams. The maximum number of concurrent TCP connections the core will establish to the agent for transferring data

•

MaxTransferQueueDepth. The maximum number of block extents which can be queued up for writing

•

MaxSegmentSize. The maximum number of contiguous blocks to transfer in a single request

•

Priority. An object which has the following data:

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

◦

"Highest (which is equal to One)

◦

"Lowest (which is equal to Ten)

◦

"Default (which is equal to Five)

•

MaxRetries. The maximum number of times a failed transfer should be retried before it is presumed failed

•

UseDefaultMaxRetries. A value indicating that the maximum number of retries is the default value

•

ProviderId. The GUID of the VSS provider to use for snapshots on this host. Administrators typically accept the default.

public AgentTransferConfiguration TransferConfiguration { get; set; } (cont.)

•

ExcludedWriterIds. Collection of VSS writer IDs which should be excluded from this snapshot. The writer ID is keyed by the name of the writer. This name is for documentation purposes only and does not have to exactly match the actual name of the writer.

•

TransferDataServerPort. A value containing the TCP port upon which to accept connections from the core for the actual transfer of data from the agent to the core.

•

SnapshotTimeout. The amount of time to wait for a VSS snapshot operation to complete before giving up and timing out.

•

TransferTimeout. The amount of time to wait for further contact from the core before abandoning the snapshot.

•

NetworkReadTimeout. The timeout for network read operations related to this transfer.

•

NetworkWriteTimeout. The timeout for network write operations related to this transfer.

•

InitialQueueSize. A size of initial queue of requests.

•

MinVolumeFreeSpacePercents. A minimal amount of free space on a volume in percent.

•

MaxChangeLogsSizePercents. A maximum size of driver change logs as part of volume capacity measured in percent.

•

EnableVerification. A value indicating whether diagnostic verification of each block sent to Core should be performed.

public AgentProtectionStorageConfiguration StorageConfiguration { get; set; }

Gets or sets the storage configuration

The AgentProtectionStorageConfiguration object contains the following data:

•

RepositoryId. The name of the repository where this agent's recovery points will be stored

•

EncryptionKeyId. The ID of the encryption key for this agent's recovery points. An empty string means no encryption

public string Key { get; set; }

The Key method generates a pseudorandom (but not cryptographically secure) key, which can be used as a one-time password to authenticate transfer requests.

public bool ForceBaseImage { get; set; }

Gets or sets the value indicating whether the transfer was a forced base image capture.

public bool IsLogTruncation { get; set; }

Gets or sets the value indicating whether logging is being truncated.

public uint LatestEpochSeenByCore { get; set; }

Gets or sets latest epoch value.

The LatestEpochSeenByCore method is the ordinal number of the most recent snapshot taken by the Core. This is the 'epoch number' assigned by the filter driver to this particular snapshot at the moment it was taken with VSS.

public Guid SnapshotSetId { get; set; }

Gets or sets the GUID assigned by VSS to this snapshot.

public VolumeSnapshotInfoDictionary VolumeSnapshots { get; set; }

Gets or sets the collection of snapshot info for each volume included in the snapshot.

TransferScriptParameterBase (namespace Replay.Common.Contracts.PowerShellExecution)

The following table presents the available objects for the TransferScriptParameterBase parameter.

Table 312. Objects for the TransferScriptParameterBase parameter
Method	Description
public AgentTransferConfiguration TransferConfiguration { get; set; }	Gets or sets the transfer configuration.
public AgentProtectionStorageConfigurationCommon StorageConfiguration { get; set; }	Gets or sets the storage configuration.

VirtualMachineLocation (namespace Replay.Common.Contracts.Virtualization)

The following table presents the available objects for the VirtualMachineLocation parameter.

Table 313. Objects for the VirtualMachineLocation parameter
Method	Description
public string Description { get; set;}	Gets or sets a human-readable description of this location.
public string Name { get; set;}	Gets or sets the name of the VM.

VolumeImageIdsCollection (namespace Replay.Core.Contracts.RecoveryPoints)

Inherits its values from the parameter, System.Collections.ObjectModel.Collection<string>.

VolumeName (namespace Replay.Common.Contracts.Metadata.Storage)

The following table presents the available objects for the VolumeName parameter.

Table 314. Objects for the VolumeName parameter

Method

Description

public string GuidName { get; set;}

Gets or sets the ID of the volume.

public string DisplayName { get; set;}

Gets or sets the name of the volume.

public string UrlEncode()

Gets a URL-encoded version of the name which can be passed cleanly on a URL.

NOTE: A known issue exists in .NET 4.0 WCF (https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=413312), which prevents path escape characters from working correctly in a URI template. Because a volume name contains both '\' and '?', you must replace the special characters '\' and '?' with other special characters.

public string GetMountName()

Returns a name for this volume that is valid for mounting volume image to some folder.

VolumeNameCollection (namespace Replay.Common.Contracts.Metadata.Storage)

Inherits its values from the parameter, System.Collections.ObjectModel.Collection<VolumeName>.

The following table presents the available objects for the VolumeNameCollection parameter.

Table 315. Objects for the VolumeNameCollection parameter
Method	Description
public override bool Equals(object obj)	Determines whether this instance and a specified object, which must also be a VolumeNameCollection object, have the same value. (Overrides Object.Equals(Object).)
public override int GetHashCode()	Returns the hash code for this VolumeNameCollection. (Overrides Object.GetHashCode().)

VolumeSnapshotInfo (namesapce Replay.Common.Contracts.Transfer)

The following table presents the available objects for the VolumeSnapshotInfo parameter.

Table 316. Objects for the VolumeSnapshotInfo parameter
Method	Description
public Uri BlockHashesUri { get; set;}	Gets or sets the URI at which the MD5 hashes of volume blocks can be read.
public Uri BlockDataUri { get; set;}	Gets or sets the URI at which the volume data blocks can be read.