Chat now with support
Chat with Support

NetVault Bare Metal Recovery 11.4 - Release Notes for Linux Live Client Plug-in

Quest® NetVault® Bare Metal Recovery Plug-in Live Client for Linux 11.4

About this release

NetVault Bare Metal Recovery Plug-in Live Client for Linux 11.4 is a minor release, with enhanced features and functionality. For complete product documentation, visit https://support.quest.com/technical-documents.

Resolved issues

Corrected an issue that prevented recovery of FIFO (named pipe) files.

DNBMR-1008 (28372)

Known issues

Backing up a Red Hat Enterprise Linux (RHEL) 5.1 Client might fail with the following error:

Workaround:

1
Open “/boot/grub/grub.conf”, and find the section from which the machine was booted.
It is similar to the following: kernel /xen.gz-2.6.18-53.el5
2
Create a file named “/storix/config/multibootfile” with a line specifying the full path to the hypervisor file as shown in the following example: /boot/xen.gz-2.6.18-53.el5

DNBMR-16 (17294, VLG‑110), DNBMR-64 (17342, VLG‑156)

After a successful restore, the size of mounted partitions might change and the temporary file systems might be unmounted. Manually mount the temporary filesystem (tmpfs) or edit “/etc/fstab” to mount it when the system starts.

DNBMR-24 (17302, VLG‑118)

If the SCSI or network devices are not available upon booting from the Storix boot media, it might indicate that your device modules are not included on the boot media or not listed in the master modules file.

Workaround:

To add the missing SCSI and network device modules, perform the following steps on the client on which the boot media is created:

1
To copy the original “bootlist” file to your custom directory, issue the following command: # cp /opt/storix/config/bootlist_scsi /storix/config/bootlist_scsi
NOTE: Use “bootlist_network” files when adding an entry for network driver and “bootlist_scsi” files when adding an entry for SCSI driver.
2
Open the “bootlist” file in the custom directory, and add your SCSI device modules following #$ SCSI adapters and network device modules following "#$ Ethernet Network Adapters.
Use the following format to add the modules: #MOD:S:module name:description
Example: #MOD:S:dc395x_trm:DC-395U SCSI adapter support

DNBMR-39 (17317, VLG‑131)

On an Ubuntu client, the Storix maintenance shell does not return the maint> prompt after a restore. This issue occurs because /bin/sh is linked to /bin/dash in Ubuntu. When the restore completes, Storix does a chroot to the newly restored root and invokes /bin/sh. This shell does not display any prompt.

DNBMR-68 (17346, VLG‑161)

The plug-in does not support encrypted partitions. If an encrypted partition is enabled, a backup fails with the following errors:

DNBMR-83 (17361, VLG‑175)

If you are using Storix, restoring to the same client or a different client of the same disk size — either of which is configured as part of a logical group and volume — causes the following message to appear:

Workaround: To adjust the partition sizes, use the View/Change Installation Settings feature in Storix.

 

To allow the recovery process to re-create a striped logical volume across multiple disks, manually change the stripe size.

1
From the Main Menu in Storix, select View/Change Installation Settings > Logical Volume Management > Add or Change Logical Volume.
3
Change the Stripe Size from 0 to the size that was originally configured.
4
To return to the Main Menu, press F3 on each selection screen.

 

Because Storix SBAdmin does not support the Dell EqualLogic driver, the plug-in does not support backup jobs sent to Dell EqualLogic devices.

DNBMR-1079, DNBMR-1097 (31073, 32465)

Self Service Tools
Knowledge Base
Notifications & Alerts
Product Support
Software Downloads
Technical Documentation
User Forums
Video Tutorials
RSS Feed
Contact Us
Licensing Assistance
Technical Support
View All
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating