Chat now with support
Chat with Support

Foglight Experience Monitor 5.8.1 - User Guide

Installing and configuring Multi-appliance clusters Configuring the appliance Specifying monitored web traffic Transforming monitored URLs Managing applications Foglight components and the appliance Using the console program Troubleshooting the appliance Appendix: Third party software Monitoring the user experience Customizing reports The alarm system Integrating the appliance SOAP-based web services

Manually adding protocols and ports

TIP: Use the Other type if you are configuring a protocol other than HTTP or HTTPS.
5
Click OK to add the configuration to the Protocols page.

Automatically discovering ports

If you require assistance determining which ports are in use with monitored traffic, you can use the Auto-Discover Ports option and have the appliance automatically discover ports that are in use.

1
On the Protocols page, click Auto-Discover Ports.
2
To stop the auto-discovery process, click Stop at any point, and use the list of ports that has been detected up to that point.

Displays the port number.

The number of client packets being transmitted from clients to the server.

The number of packets being transmitted from servers to client.

The number of new TCP connections observed on the port.

The number of active TCP connections discovered in the traffic for the port.

5
Click Add.

Removing protocols

On the main Protocols page, you can remove a protocol that is no longer being used by the TCP protocol on your network. You can delete a Protocol by selecting its corresponding check box, then click Delete.

Managing protocols on a Portal

When you access the Protocol page on a portal, a section for each probe displays the protocols and ports being monitored by each probe.

Figure 45. Protocols page

To configure protocols and ports for a probe you must use the web console of the probe. Click Configure protocols on the probe to launch the web console for the probe so you can modify the configuration. For more information about configuring protocols, see Identifying protocols.

Related Documents