Chat now with support
Chat with Support

DR Series DR2000v - 部署指南

This chapter provides information about deploying the Dell DR2000v on VMware ESXi.

For detailed information about supported VMware ESXi versions, platform and license limits, virtual infrastructure and memory requirements, and other information, see the Dell DR Series System Interoperability Guide.

The deployment process comprises the following tasks:

1.
Deployment of the DR2000v via one of the following:
◦
Using the vSphere Client
◦
Using the vSphere Web Client
 
NOTE: The security policy for vSwitches in VMware environments should be configured to allow MAC Address Changes, this can be achieved by enabling the Allow MAC Address changes and Forged Transmits option in the Layer-2 security policies of the vSphere vSwitches.

To edit the Layer 2 security policies of vSphere vSwitches, navigate to Security Policy settings and set the value for the MAC Address Changes and Forged Transmits to Accept. For more information about security, see the vSphere Security documentation.

2.
Setting up and Configuring the DR2000v
3.
Registering the DR2000v with a Physical DR Series System
 
 

Deploying DR2000v using vSphere Client

Deploying DR2000v using vSphere Client

The following instructions describe the steps for deploying Dell DR2000v on VMware ESXi using the vSphere client.

Acquire the DR2000v installation package and store it on your system or a network location. This package is in VMware ESXi ova format.
2.
Launch the vSphere client, and log on to the vCenter server or the ESX host.( If you are using ESXi version 5.5, use the Web client, since the vSphere client does not work with 5.5. See the topic, “Deploying DR2000v using the vSphere Web Client,” for more information about deploying using the Web client.)
3.
In the vCenter management console, highlight the ESX host that will be hosting the VM, and then select File > Deploy OVF Template.
4.
In the Deploy OVF Template - Source dialog box, click Browse.
5.
Browse to the location of the DR2000v .ova package on your system or network, select it, and click Open.
6.
In the Deploy OVF Template - Source window, click Next.
7.
In the Deploy OVF Template - OVF Template Details dialog box, click Next.
8.
In the Deploy OVF Template - Name and Location dialog box, enter the Virtual Machine (VM) name and click Next.
9.
In the Deploy OVF Template – Storage dialog box, choose a data store that meets the storage space requirement (with minimum free space of at least the size the of the DR2000v system), and then click Next.
10.
In the Deploy OVF Template - Disk Format dialog box, choose a storage provisioning method, and then click Next.
Note that selecting thin provisioning will require the space to be allocated as needed and may result in additional performance impact.
11.
In the Deploy OVF Template — Ready to Complete dialog box, review the deployment information, select Power on after deployment, and click Finish.
If the network setting does not default to the network you want, you might have to edit the network mapping after this setup.
A dialog box appears to show progress of the deployment process.
12.
In the Deployment Completed Successfully dialog box, click Close.
The DR2000v will boot up. (It takes approximately 3-5 minutes to self-extract the installation package and install all of the components.)
13.
Proceed with the initial setup and configuration of the DR2000v. Refer to the topic, “Setting up and Configuring the DR2000v,” for instructions.
Parent topic 

使用 vSphere Web Client 部署 DR2000v

以下说明介绍使用 vSphere Web Client 在 VMware ESXi 上部署 Dell DR2000v 的步骤。
1.
获取 DR2000v 安装包并将其存储在您的系统或网络位置中。此安装包采用 VMware ESXi ova 格式。
2.
启动并登录 vSphere Web Client。
3.
右键单击将托管 DR2000v 的 ESXi 主机，然后选择 Deploy OVF Template（部署 OVF 模板）。
4.
在 Deploy OVF Template - Source（部署 OVF 模板 - 源）窗口中，单击 Browse（浏览）以找到系统或网络位置中的 DR2000v .ova 模板，然后单击 Open（打开）。
5.
单击 Next（下一步）继续。
6.
检查 Deploy OVF Template（部署 OVF 模板）对话框中的详细信息，然后单击 Next（下一步）继续。
7.
在 Deploy OVF Template – Select Name and Folder（部署 OVF 模板 - 选择名称和文件夹）对话框中，输入虚拟机的名称并选择将放置该虚拟机的文件夹，然后单击 Next（下一步）继续。
8.
在 Deploy OVF Template – Select Storage（部署 OVF 模板 - 选择存储）对话框中，选择虚拟磁盘格式和目标数据存储，然后单击 Next（下一步）继续。必须选择符合存储空间需求（可用空间至少达到 DR2000v 系统的大小）的数据存储。
选择 Thick Provision Lazy Zeroed（密集配置延迟置零）将导致 ESX 高物理 CPU 使用率，直到存储已分配并清零。选择 Thin Provision（精简配置）将导致碎片化的磁盘，因为是按需配置存储。
9.
在 Deploy OVF Template - Setup Networks（部署 OVF 模板 - 设置网络）对话框中，配置所部署的模板应使用的网络，然后单击 Next（下一步）继续。
10.
在 Deploy OVF Template — Ready to Complete（部署 OVF 模板 - 已准备好完成）对话框中，检查设置，选中 Power on after deployment（部署之后开启电源），然后单击 Finish（完成）。
随即会显示一个对话框，其中显示部署过程的进度。
11.
在 Deployment Completed Successfully（部署成功完成）对话框中，单击 Close（关闭）。
DR2000v 将启动。（自解压安装包和安装所有组件需要耗时约 3-5 分钟。）
12.
继续进行 DR2000v 的初始设置和配置。有关说明，请参阅“设置和配置 DR2000v”主题。
父主题 
Deploying the Dell DR2000v on VMware ESXi

Deploying the Dell DR2000v On Microsoft Hyper-V

Deploying the Dell DR2000v On Microsoft Hyper-V

Deploying DR2000v on a local Microsoft Hyper-V host
Prerequisites for deploying the Dell DR2000v on a remote Hyper-V host
Changing the storage paths for Hyper-V deployment
Deploying the DR2000v on a Remote Hyper-V Host

This chapter provides information about deploying the Dell DR2000v on Microsoft Hyper-V.

For detailed information about supported Microsoft Hyper-V versions, platform and license limits, virtual infrastructure and memory requirements, and other information, see the Dell DR Series System Interoperability Guide.

Before you begin the deployment process, ensure you have met the prerequisites described in the topic, Prerequisites for the Dell DR2000v on Microsoft Hyper-V.

The deployment process comprises the following tasks:

1.
Deploying the DR2000v on one of the following:
◦
On a local Hyper-V Host
◦
On a remote Hyper-V Host
2.
Setting up and configuring the DR2000v
3.
Registering the DR2000v with a physical DR Series system
 
NOTE: As Microsoft only supports OVF format on system center Virtual Machine Manager. Using the Power Shell scripts, the Dell DR2000v appliance’s deployment for the Hyper-V infrastructure is made easier, and the procedure for creating virtual appliance with required settings is automated.
 
 
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating