Chat now with support
Chat with Support

DR Series DR2000v - 배포 안내서 정보

This chapter provides information about deploying the Dell DR2000v on VMware ESXi.

For detailed information about supported VMware ESXi versions, platform and license limits, virtual infrastructure and memory requirements, and other information, see the Dell DR Series System Interoperability Guide.

The deployment process comprises the following tasks:

1.
Deployment of the DR2000v via one of the following:
◦
Using the vSphere Client
◦
Using the vSphere Web Client
 
NOTE: The security policy for vSwitches in VMware environments should be configured to allow MAC Address Changes, this can be achieved by enabling the Allow MAC Address changes and Forged Transmits option in the Layer-2 security policies of the vSphere vSwitches.

To edit the Layer 2 security policies of vSphere vSwitches, navigate to Security Policy settings and set the value for the MAC Address Changes and Forged Transmits to Accept. For more information about security, see the vSphere Security documentation.

2.
Setting up and Configuring the DR2000v
3.
Registering the DR2000v with a Physical DR Series System
 
 

Deploying DR2000v using vSphere Client

Deploying DR2000v using vSphere Client

The following instructions describe the steps for deploying Dell DR2000v on VMware ESXi using the vSphere client.

Acquire the DR2000v installation package and store it on your system or a network location. This package is in VMware ESXi ova format.
2.
Launch the vSphere client, and log on to the vCenter server or the ESX host.( If you are using ESXi version 5.5, use the Web client, since the vSphere client does not work with 5.5. See the topic, “Deploying DR2000v using the vSphere Web Client,” for more information about deploying using the Web client.)
3.
In the vCenter management console, highlight the ESX host that will be hosting the VM, and then select File > Deploy OVF Template.
4.
In the Deploy OVF Template - Source dialog box, click Browse.
5.
Browse to the location of the DR2000v .ova package on your system or network, select it, and click Open.
6.
In the Deploy OVF Template - Source window, click Next.
7.
In the Deploy OVF Template - OVF Template Details dialog box, click Next.
8.
In the Deploy OVF Template - Name and Location dialog box, enter the Virtual Machine (VM) name and click Next.
9.
In the Deploy OVF Template – Storage dialog box, choose a data store that meets the storage space requirement (with minimum free space of at least the size the of the DR2000v system), and then click Next.
10.
In the Deploy OVF Template - Disk Format dialog box, choose a storage provisioning method, and then click Next.
Note that selecting thin provisioning will require the space to be allocated as needed and may result in additional performance impact.
11.
In the Deploy OVF Template — Ready to Complete dialog box, review the deployment information, select Power on after deployment, and click Finish.
If the network setting does not default to the network you want, you might have to edit the network mapping after this setup.
A dialog box appears to show progress of the deployment process.
12.
In the Deployment Completed Successfully dialog box, click Close.
The DR2000v will boot up. (It takes approximately 3-5 minutes to self-extract the installation package and install all of the components.)
13.
Proceed with the initial setup and configuration of the DR2000v. Refer to the topic, “Setting up and Configuring the DR2000v,” for instructions.
Parent topic 

vSphere 웹 클라이언트를 사용하여 DR2000v 배포

다음은 vSphere 웹 클라이언트를 사용하여 VMware ESXi에서 Dell DR2000v를 배포하는 단계를 설명하는 지침입니다.
1.
DR2000v 설치 패키지를 시스템 또는 네트워크 위치에 저장하십시오. 이 패키지는 VMware ESXi ova 형식으로 제공됩니다.
2.
vSphere 웹 클라이언트를 시작하고 로그인합니다.
3.
DR2000v를 호스팅할 ESXi 호스트를 마우스 오른쪽 단추로 클릭하고 Deploy OVF Template(OVF 템플릿 배포)을 선택합니다.
4.
Deploy OVF Template - Source(OVF 템플릿 배포 - 소스) 창에서, Browse(찾아보기)를 클릭하여 시스템 또는 네트워크 위치에서 DR2000v .ova 템플릿을 찾은 후 Open(열기)을 클릭합니다.
5.
계속 진행하려면 Next(다음)를 클릭합니다.
6.
Deploy OVF Template(OVF 템플릿 배포) 대화상자의 세부사항을 검토하고 Next(다음)를 클릭하여 계속 진행합니다.
7.
Deploy OVF Template – Select Name and Folder(OVF 템플릿 배포 - 이름 및 폴더 선택) 대화상자에서, 가상 머신의 이름을 입력하고 이를 호스트하는 폴더를 선택한 후 Next(다음)를 클릭하여 계속 진행합니다.
8.
Deploy OVF Template – Select Storage(OVF 템플릿 배포 - 스토리지 선택) 대화상자에서, 가상 디스크 형식과 대상 데이터 저장소를 선택한 후 Next(다음)를 클릭하여 계속 진행합니다. 스토리지 공간 요구사항(적어도 DR2000v 시스템 크기의 최소 여유 공간)을 충족하는 데이터 저장소를 선택해야 합니다.
Thick Provision Lazy Zeroed(씩 프로비저닝 레이지 제로)를 선택하면 스토리지가 할당되고 비워질 때까지의 ESX 실제 CPU 사용량이 됩니다. Thin Provision(씬 프로비저닝)을 선택하면 필요에 따라 스토리지가 프로비저닝되기 때문에 조각난 디스크가 됩니다.
9.
Deploy OVF Template - Setup Networks(OVF 템플릿 배포 - 네트워크 설정) 대화상자에서, 배포된 템플릿에서 사용할 네트워크를 구성하고 Next(다음)를 클릭하여 계속 진행합니다.
10.
Deploy OVF Template - Ready to Complete(OVF 템플릿 배포 - 완료 준비) 대화상자에서, 설정을 검토하고 Power on after deployment(배포 후 전원 켜기)를 선택한 후 Finish(마침)를 클릭합니다.
배포 프로세스 진행 상태를 보여주는 대화상자가 나타납니다.
11.
Deployment Completed Successfully(성공적으로 배포 완료) 대화상자에서 Close(닫기)를 클릭합니다.
DR2000v가 부팅됩니다. 설치 패키지의 압축을 자동으로 풀고 모든 구성요소를 설치하는 데 약 3-5분 정도 걸립니다.
12.
DR2000v 초기 설정 및 구성을 계속 진행합니다. 자세한 지침을 보려면 "DR2000v 설정 및 구성"을 참조하십시오.
상위 주제 
Deploying the Dell DR2000v on VMware ESXi

Deploying the Dell DR2000v On Microsoft Hyper-V

Deploying the Dell DR2000v On Microsoft Hyper-V

Deploying DR2000v on a local Microsoft Hyper-V host
Prerequisites for deploying the Dell DR2000v on a remote Hyper-V host
Changing the storage paths for Hyper-V deployment
Deploying the DR2000v on a Remote Hyper-V Host

This chapter provides information about deploying the Dell DR2000v on Microsoft Hyper-V.

For detailed information about supported Microsoft Hyper-V versions, platform and license limits, virtual infrastructure and memory requirements, and other information, see the Dell DR Series System Interoperability Guide.

Before you begin the deployment process, ensure you have met the prerequisites described in the topic, Prerequisites for the Dell DR2000v on Microsoft Hyper-V.

The deployment process comprises the following tasks:

1.
Deploying the DR2000v on one of the following:
◦
On a local Hyper-V Host
◦
On a remote Hyper-V Host
2.
Setting up and configuring the DR2000v
3.
Registering the DR2000v with a physical DR Series system
 
NOTE: As Microsoft only supports OVF format on system center Virtual Machine Manager. Using the Power Shell scripts, the Dell DR2000v appliance’s deployment for the Hyper-V infrastructure is made easier, and the procedure for creating virtual appliance with required settings is automated.
 
 
Related Documents

The document was helpful.

Select Rating

I easily found the information I needed.

Select Rating