Labelling or blanking a media fails.
The following messages are returning the by scsi layer:
CHGSCSI :05696 22 0 160844 CMD MOVE MEDIUM [ a5 00 00 00 10 00 01 01 00 00 00 00 ]
CHGSCSI :05696 24 0 160844 CMD STATUS 'CHECK CONDITION' [2]
CHGSCSI :05696 25 0 160844 CMD SENSE KEY 'ILLEGAL REQUEST' [5] - ASC 3b ASCQ 0d
CHGSCSI :05696 74 0 160844 CMD SENSE INFO 'MEDIUM DESTINATION ELEMENT FULL'
CHGSCSI :05696 39 0 160844 Command at bit 7 of byte 6 is in error
CHGSCSI :05696 204 0 160844 tDevRet = DEV_INVALID_REQUEST
CHGSCSI :05696 107 0 160844 0x106 = ChgScsiCmd(0111F290)
CHGSCSI :05696 158 0 160844 MoveMedia: illegal move destination full
CHGSCSI :05696 165 0 160844 tDevRet is 262 for MoveMedia from 4096 to 257 (Queued Unloads = FALSE, Contents Changed = FALSE)
Library and drive not configured correctly. The drives have not been set in the right bay within Netvault.
1- Physically identify the drives and their locations within the library . The best way to do this is to use the web interface of the library. Make a note of each drive's serial and its location.
2- Open Netvault Admin Console
3- Go to Device Management
4- Make a note of the library configuration (its name) , the drive's configuration (block size, buffer etc.). Take some screenshots if necessary.
5- Delete the library
6- Re-add the library. When selecting the drive make sure you select the right bay number as identified in step 1. All other configuration should be the same as before otherwise previously configured jobs will fail.
