KACE Systems Management Appliance 9.1 Common Documents - Administrator Guide

The maximum number of all emails the Service Desk receives and responds with email notifications. The default value is 100 emails.

Total Emails

Received within the interval of x minutes

The time interval in minutes during which the specified number of emails are received. The default value is one minute.

To disable this restriction, you can set to a high number such as 99999.

Configure the thresholds for inbound email notifications per ticket, during a specific period. When these levels are reached, the Service Desk will stop sending email notifications.

Option	Description
Total Emails per Ticket	The maximum number of all emails the Service Desk receives for each ticket, and responds with email notifications. The default value is 5 emails per ticket.
Received within the interval of x minutes	Specify the time interval in minutes during which the specified number of emails for each ticket are received. The default value is one minute. To disable this restriction, set this option to a high number such as 99999.

Click Save.

Next, you can configure POP3 email accounts for specific Service Desk queues. For more information, see Configure queue-specific email settings.

Configuring email triggers and email templates

Configure email triggers

Configure email templates

You can set up triggers that automatically send email from the KACE SMA and use templates to set the content of those email messages.

The Email on Events section determines which actions trigger an email to the various KACE SMA users. Email templates determine the content of the messages.

Timing of email messages

The following email events trigger the KACE SMA to send email immediately:

•

Comment: The system sends email notifications for comments when users add comments and click Submit on the ticket form. When users add comments and click Save on the ticket form, however, only the Any Change notification is sent.

•

Ticket Closed: If the Satisfaction Survey is enabled, an email that describes the Satisfaction Survey is sent immediately when tickets are closed.

The following email events trigger the KACE SMA to send email every few minutes to prevent email overload:

•

•

•

•

•

•

•

•

Configure email triggers

You can configure email triggers for a queue. If you have multiple queues, you can configure the email triggers for each queue separately.

Go to the Service Desk Queue Detail page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, click Queues.

Display the Queue Detail page by doing one of the following:

▪

Click the name of a queue.

▪

Select Choose Action > New.

On the Queue Detail page, under Email Address, click Configure Queue Email Settings link to display the Service Desk Queue Email Settings page.

On the Service Desk Queue Email Settings page, in the Email on Events section, select the options for sending email when the specified events occur. Each column represents a type of Service Desk user (role) and each row represents a ticket event.

Service Desk user (role)	Description
Owner	The person who is expected to resolve the ticket.
Submitter	The person whose issue is being resolved.
Approver	The person who can approve or reject the ticket for processing.
Ticket CC	One or more email addresses that are stored in the CC field of the ticket.
Category CC	One or more email addresses that are stored in the CC List of the Category Value of the ticket. See Configure CC lists for ticket categories.
Queue Owners	One or more owners of the ticket queue, as specified by the Owner label. This only applies to the New Ticket Via Email and New Ticket via Portal events.

When a ticket event occurs, email is sent to the selected roles or users. For example, if you select the Any Change box in the Owner column, email is sent to the ticket owner whenever the ticket is changed. For the Comment and Ticket Closed triggers, email is sent immediately. For other ticket changes, however, email is sent every few minutes to prevent email overload.

NOTE: If users have the KACE GO mobile app installed on their smart phone or tablet, the system sends push notifications for the selected Service Desk ticket events.

Option	Description
Any Change	Any information on the ticket is changed.
Owner Change	The ticket's Owner field is changed.
Status Change	The ticket's Status field is changed.
Comment	Information, attachments, or screen shots are added to the ticket's Comments section. The system sends email notifications for comments when users add comments and click Submit on the ticket form. When users add comments and click Save on the ticket form, however, only the Any Change notification is sent.
Approval Change	The ticket's approval status has changed.
Resolution Change	The ticket's resolution has changed.
Escalation	The ticket has not been updated to a stalled or closed status within the escalation time defined by the ticket priority.
SLA Violation	The ticket has not been resolved by its due date.
Ticket Closed	The ticket's Status field is changed to Closed. This event is used to present a Satisfaction Survey to submitters. See Using the Satisfaction Survey.
New Ticket Via Email	A user sends an email message to the Service Desk and a ticket is created.
New Ticket Via Portal	A ticket is created through the User Console.

Click Save.

Configure email templates

You can configure the email templates that Service Desk uses to generate email messages for a queue. If you have multiple queues, you customize the email templates for each queue separately.

Go to the Service Desk Queue Detail page:

On the left navigation bar, click Service Desk, then click Configuration.

On the Configuration panel, click Queues.

Display the Queue Detail page by doing one of the following:

▪

Click the name of a queue.

▪

Select Choose Action > New.

On the Queue Detail page, under Email Address, click Configure Queue Email Settings link to display the Service Desk Queue Email Settings page.

On the Service Desk Queue Email Settings page, in the Email on Events section, click Customize Emails to display the Service Desk Email Notifications page.

On the Service Desk Email Notifications page, change the following email templates as needed.

NOTE: If the default text for any of the templates is changed, the email messages will not be translated into different languages.

Ticket-related template

Owners, the ticket CC list, and ticket Category CC list

Default recipients

Ticket Escalated

Used to send periodic notifications according to the Escalation Time configured for the ticket priority in the queue. For example, if tickets with the priority of High have an Escalation Time of 30 minutes, this email is sent every 30 minutes for High priority tickets until the ticket priority changes or until the ticket is closed.

Ticket Created from Email

Used to acknowledge that a ticket has been created through email.

Submitters

Ticket Modified

Used to notify recipients when ticket information is changed or added.

Owners and the ticket CC list

Comment Submitted

Used to notify recipients that comments have been added to tickets.

Owners, submitters, approvers, the ticket CC list, and the ticket Category CC list

Ticket Closed

Used to present a Satisfaction Survey to submitters when tickets are closed. See Using the Satisfaction Survey.

Submitters

Email Ticket Manually

Used to for messages that are forwarded using the Email Ticket action on Ticket Detail pages.

TIP: If you use HTML/Markdown, the $ticket_fields_visible token must be enclosed in the <pre> tag to prevent formatting, such as line breaks, from being discarded. For example:

<pre>$ticket_fields_visible</pre>

Manually entered by the sender

SLA Violated

Used to notify recipients that a ticket has remained open past the due date calculated using the SLA (Service Level Agreement) settings and the ticket priority.

None. Configurable on the Queue Detail page

Error-related template	Description	Recipients
Error Creating Ticket from Email	Used to notify senders that the ticket could not be created for reasons other than unknown email address.	Submitters
Unknown Email Address Response	Used to notify senders that the ticket could not be created because the submitter's email address is unknown.	Submitters

Table 6. Tokens used in all email templates
Token	Description
$helpdesk_email	The email address associated with the Service Desk queue. This address is configured on the Queue Detail page.
$helpdesk_name	The name of the Service Desk queue. This name is configured on the Queue Detail page.
$userui_url	A link to the User Console. Access to the User Console requires login credentials.

Table 7. Tokens used in ticket-related email templates

Token

A formatted representation of the changes that were made the last time the ticket was saved, including both field changes and comments.

$change_desc

$last_attachment

The most recent attachment added to the ticket.

$last_comment

The most recent comment added to the ticket.

$mobile_ticket_url

A link to the ticket KACE GO mobile app. When displayed in an email on an Android or iOS mobile device, this links opens the associated ticket in the KACE GO mobile app.

$process_description

The process description. It can include important pre-requisites that the users need to complete before proceeding to create a ticket based on a process template.

$process_name

The name of the process template.

$process_status

The status of the process template such as Approval Required, Approval Timed Out, Approval Received, Approval Rejected, Process Cancelled, and Process Complete.

$process_type

The type of the process. In a default installation, only the Service Desk process type is included. You can create new process types, as required. For example, you can create a process type for accessing a specific application, or a group of applications. For more information, see Define process types.

$ticket_approver_email

The email address of the ticket approver. Having this address is especially useful for Comments email notifications.

$ticket_approver_name

The name of the ticket approver.

NOTE: The approver name and contact information is derived from the USER record associated with the fields on the ticket.

$ticket_approver_phone_home

$ticket_approver_phone_mobile

$ticket_approver_phone_pager

$ticket_approver_phone_work

By default, all ticket queues are configured with 15 custom fields, but this number can be increased as needed.

$ticket_custom_X_label

$ticket_custom_X_value

The label and value used for a custom field, where X represents the index number of the custom field.

For example, if a queue has a ticket field labeled, CUSTOM_5, and that field is configured with the label Location Name, the system replaces $ticket_custom_5_label with the text, Location Name. The token, $ticket_custom_5_value is replaced with the ticket value that was saved for the Location Name field, such as, Topeka or Albuquerque.

NOTE: Each queue can have different custom fields and different email template configurations.

$ticket_due_date

The due date as saved on the ticket. Administrators can override automatic due dates with manual due dates if necessary.

$ticket_escalation_minutes

The time, in minutes, between periodic notifications. This time is determined by the Escalation Time configured for the ticket priority in the queue. For example, if tickets with the priority of High have an Escalation Time of 30 minutes, this email is sent every 30 minutes for High priority tickets until the ticket priority changes or until the ticket is closed. This token is typically used in the Ticket Escalated email template, to inform recipients of the frequency of email notifications.

$ticket_fields_visible

Include all the ticket fields that are visible for the user who is forwarding the ticket by email.

TIP: If you use HTML/Markdown, the $ticket_fields_visible token must be enclosed in the <pre> tag to prevent formatting, such as line breaks, from being discarded. For example:

<pre>$ticket_fields_visible</pre>

$ticket_history

The complete history of the ticket.

NOTE: For some tickets, the history information can become very detailed and too large to send through email. If the complete history is not needed, use $ticket_history_X to limit the number of records to include.

$ticket_history_X

A specified number of records in the ticket history. X indicates the number of records to include, beginning with the most recent.

$ticket_id

A unique identifier assigned to the ticket, also called the ticket number. Using this identifier is the primary method for users to identify tickets.

$ticket_number

A formatted version of the ticket ID. This version begins with TICK followed by a minimum of five digits. For example, a ticket with ID 4321 is displayed as TICK:04321. This format is especially useful in email Subject lines to make sure that email replies link to the correct tickets.

$ticket_owner_email

The email address of the Service Desk administrator assigned to the ticket.

$ticket_owner_name

The name of the Service Desk administrator assigned to the ticket.

NOTE: The owner name and contact information is derived from the USER record associated with the fields on the ticket.

$ticket_owner_phone_home

Contact information for the Service Desk administrator assigned to the ticket.

$ticket_owner_phone_mobile

Contact information for the Service Desk administrator assigned to the ticket.

$ticket_owner_phone_pager

Contact information for the Service Desk administrator assigned to the ticket.

$ticket_owner_phone_work

Contact information for the Service Desk administrator assigned to the ticket.

$ticket_priority

The priority assigned to the ticket. Default values include High, Medium, and Low.

$ticket_resolution

Information about what was done to resolve the ticket as described in the ticket’s Resolution field.

$ticket_status

The status of the ticket. Defaults include New, Opened, Closed, Need More Info, Reopened, Waiting Overdue, Waiting on Customer, and Waiting on Third Party.

$ticket_submitter_email

The email address of the submitter.

$ticket_submitter_name

The name of the submitter.

NOTE: The submitter name and contact information is derived from the USER record associated with the fields on the ticket.

$ticket_submitter_phone_home

$ticket_submitter_phone_mobile

$ticket_submitter_phone_pager

$ticket_submitter_phone_work

$ticket_title

The title of the ticket as it appears on the Ticket Detail page.

$ticket_url

A link to the ticket in the User Console. Access to the User Console requires login credentials.

$ticket_http_url

A link to the ticket in the User Console. This format is used for backward compatibility on older systems. Access to the User Console requires login credentials.

$ticket_https_url

A secure link to the ticket in the User Console. Use this token if SSL is enabled on your appliance. This ensures that links sent through email work correctly.

$userui_url

A link to the home page of the User Console. Access to the User Console requires login credentials.

Table 8. Tokens used in error-related email templates

Token